Jayco Camper Van
Bed End Plywood Protector disc kit.

Kit includes the following parts
  • QTY 4 x Laser Cut 316 Stainless Protector Discs.
  • QTY 8 x 316 Stainless Fasteners (Phillips Head Screw)
  • QTY 8 x 316 Stainless Washers Large (Location - Top of Plywood)
  • QTY 8 x 316 Stainless Washers Small (Location - Under Existing Jayco Bed End Support Bracket)
  • QTY 8 x 316 Stainless Nyloc Nuts


*NOTE: All Laser Cut parts are fully Deburred to remove all sharp edges before shipping*



Please select the correct disc shape to suit your Camper Van before purchasing

  • Kit #1 OOOO Includes QTY 4 x Round Discs and is suitable for bed bases that do not have any wooden doublers or other obstacles that will hinder flat fitment.
  • Kit #2 OODD Includes QTY 2 x Round Discs & QTY 2 x 'D' Shaped Discs Which give greater clearance from any wooden doublers or other obstacles (see photos) and minimises the need to 'trim' the parts to suit.
  • Kit #3 DDDD Includes QTY 4 x 'D' Shaped Discs to give greater clearance from any wooden doublers or other obstacles (see photos) and minimises the need to 'trim' the parts to suit.



Fitting Instructions.
  1. Carefully drill out existing rivets to remove Jayco brackets and old hardware from plywood.
  2. Ensure all rivets are completely removed from all brackets (Hammer and punch or a drill may be required)
  3. Refit original Jayco brackets along with new protector discs and supplied hardware, (Assemble as per assembly photo) do not over tighten the fasteners.
  4. Remove all swarf (metal shavings) from the work area, check for fastener/bracket clearance when stowing bed ends to prevent any potential damage to the Camper Van or upholstery.
  5. Completely set up the bed ends, load test and check that they still function as they should.


Designed and Manufactured in Adelaide, South Australia using locally supplied parts.