DIEWU - Industrial Grade Ethernet Switch, DIN Rail, 5 Ports, 10 / 100M, Enhance Built-in Signal and RJ45 VLAN Network Switch Controller
Design highlights: Supports DC 5 ~ 58V input range; Industrial-of; Enhance the built-in signal and VLAN switch; Innovative design, metal housing. Product specification Model number TXE173 Chipset IP175GHI Port number 5-port 10 / 100M MDI-MDIX RJ45 Standard IEEE 802.3 、 IEEE 802.3u 、 IEEE 802.3x 、 IEEE 802.3az Media network 10Base-T, cat3 or higher UTP, 100Base-Tx, cat5 UTP Data speed 10 / 100M Of the rate 10 Mbps / 14,880 pps 100 Mbps / 148,800 EPA LED indicator 10 / 100Mbps (link / action, speed), power, improvement indicator Dimension 118 * 80 * 30mm Input power DC5V-58V Energy consumption Max1.5W Environment Operating temperature: -40 ℃ -85 ℃ Corresponding humidity: 10% -90% (non-condensing) Storage temperature: -40 ℃ -85 ℃ Corresponding humidity: 5% -90% (non-condensing) Other function Upgrade switch Chipset characteristic: Integrated 5 ports 10/100 PHY switch controller Support 5 100BaseTX or 4 100Base TX + 1 FX Support automatic MDI-MDIX function Power Management Tool (PWMT) ®) -AP, automatic power saving while plugging-off -Energy saving based on IEEE 802.3az protocol and 10Mbps Te by 10Mbps -WOL + ®, Light traffic energy saving -PWD, power saving shutdown Supports Automatic Factory Test (AFT®) 3.3V single power supply Built in Vcore regulator Two priority queues per port Support 802.1p & DiffServ based on QoS QoS -Base port -802.1p -IP DiffServ IPV4 / IPV6 - TCP / UDP port number -Pins configure priority ports (VIP port) Supports maximum packet length option of 1552/1536 bytes Support port mirror function Compatible with 1k MAC address Support transmission storm protection Support Port trunking (LACP) Support 16 VLAN (IEEE 802.1q) -VLAN based on port / tagging -Insert bracket, remove tag Built-in 50 ohm resistors to simplify BOM 85nm process Package, and operating temperature