|
|
||||||
|
|
|
|
|||
Description
Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.
Highlights include
- Built to meet or exceed original equipment performance
- Simple electrical plug assembly, no wire splicing necessary
- High-quality steel and plastic compounds for greater durability
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Replaces dealer part number:741-674, F6TZ 1523209-AA
Fitting for the following vehicles
1981-1996 Ford Bronco Front Left with Motor
1981-1983 Ford F100 Truck Front Left with Motor
1981-1996 Ford F150 Truck Front Left with Motor
1997 Ford F250 Truck Front Left with Motor
1981-1996 Ford F250 Truck Front Left with Motor
1981-1997 Ford F350 Truck Front Left with Motor
1988-1997 Ford F450 Truck Front Left with Motor
Package
1x Window regulator with Motor in a box
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior panel.
Warranty:
This product is covered by our 1-year warranty.
If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
| Item Specifics | |
|---|---|
| Brand | ignitionco |
| Manufacturer Part Number | VA15012701p |
| Placement on Vehicle | Front Left |
| Type | Regulator & Motor Assembly |
| Operating Mode | Electric |
| Motor Included | Yes |
| OE/OEM Part Number | 741-674 |
| Custom Bundle | No |
| Package Contents | 1 Power Window Regulator |
| Packaging Type | Box |
| Manufacturer Warranty | 1 Year |
| Fit for | 1981-1996 Ford F150 Truck |
| Superseded Part Number | Front Driver Side Replacements |
| Surface Finish | Smooth |
| Product Fit | Direct fit |
| Attachment Type | :Bolt On |
| Performance Part | Yes |
| Modified Item | No |
| Installation Instructions Included | No |
| Gear Material | Plastic |
| Frame Material | Metal and Plastic |
| Mounting Hardware Included | No |
| Fitment Type | Direct Replacement |
| Weight | about 5 lbs |
| Package Size | 24*11*3 inch |
| Fitment(Note) | Verify this part fits your vehicle using the compatibility chart |
| Housing Material | Steel |
- Orders processed within 24-48 hours of payment verification.
- We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
- The images shown are not the actual item and are for your reference only.
- Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
Store Cat. New List Item
Hot Item
|
For Ford F150 F250 F350 Truck Bronco Front Left w/ Motor Power Window Regulator
Description
Highlights include
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Fitting for the following vehicles
1981-1996 Ford Bronco Front Left with Motor
Package
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel. 2.Gently remove the plastic door cover. 3.Locate the window mounting bolts. 4.Move the window if necessary to access the bolts. 5.Remove the bolts while a friend supports the window. 6.Raise the window up into the door frame. 7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts. 9.Locate and remove the window motor mounting bolts. 10.Disconnect the motor wiring harness connector. 11.Remove the motor and regulator through the access port. 12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place. 14.Replace the mounting bolts. 15.Reconnect the electrical connector. 16.Remove the masking tape and lower the window back down. 17.Insert the window mounting bolts. 18.Reinstall the plastic liner and interior panel.
Warranty:
This product is covered by our 1-year warranty. If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Copyright of ignition-coil. All rights reserved. |
