Mafiabikes Medusa 26 Wheelie Bike - Available in multiple colourways


Click here to check out our shop for all Mafia Wheelie bike models and colourways!


The Medusa is the most popular wheelie bike on the scene! Kitted out with everything you need. Liquids, wheelie seat and equipped with our Brand new snakeskin 2 tyres ,this bike is a swerve machine!

This bike is sold for off-road use only. It is specifically designed for off-road racing on enclosed tracks. We do not offer a road kit for this bike, as it is NOT to be used on the road.



GEOMETRY

A. TOP TUBE LENGTH

571mm

 

B. CHAINSTAY LENGTH

406mm

C. HEAD ANGLE

71°

D. HEAD TUBE LENGTH

117mm

E. SEAT TUBE ANGLE

75°

F. STANDOVER

712mm

G. REACH

441mm

J. BB DROP

19.4mm



SPECS

FRAME

Medusa

FORK

Medusa Fork 

HANDLEBAR

Roadman 4 Piece W762mm X H152mm  

GRIPS

Mafiabikes Lucky 6 150mm 

STEM

Mafiabikes forged Topload - 50mm Reach

HEADSET

1 1/8” Integrated - Sealed bearings

SADDLE

Mafiabikes Wheelie seat - Railed

SEATPOST

Ø25.4mm micro adjust alloy 

SEATCLAMP

Ø28.6mm External 

CRANKS

170mm 4130 chromoly heat treated 19mm 8 spline 3 piece cranks

BOTTOM BRACKET

Sealed Mid - 19mm ID

PEDALS

9/16” Mafiabikes plastic

CHAIN

KMC Single speed 1/2"*1/8"

CHAINRING/SPROCKET FRONT

25t Mafiabikes Steel Sprocket (Alloy Gully Sprocket on Medusjah)

SPROCKET/CASSETTE REAR

11t Fully sealed Cassette 

BRAKE FRONT

Side pull cable brake (supplied in roadkit)

BRAKE REAR

Zoom - hydraulic disc brake 160mm rotor

TYRE FRONT

Lagos Snakeskin 2 26” x 2.5”

TYRE REAR

Lagos Snakeskin 2 26” x 2.5”

RIM FRONT

26" Double wall alloy 36h

RIM REAR

26" Double wall alloy 36h

HUB FRONT

Alloy shell, Fully sealed bearings, 3/8" axle

HUB REAR

Alloy shell, 3/8" axle, Fully sealed bearings, Disc 



TECH

BB TYPE

73mm Mid Sealed (19mm)

HEADSET TYPE

1 1/8” integrated

REAR AXLE/HUB SPACING

3/8" x 135mm axle, disc mount

MAX TIRE WIDTH REAR

(WITH 6MM CLEARANCE)

66mm / 2.6"

SEATPOST/ SEATCLAMP

Ø25.4mm post Ø28.6 seatclamp

FRONT AXLE/HUB SPACING

3/8" x 100mm axle, disc mount

MAX TYRE WIDTH FRONT

(WITH 6MM CLEARANCE)

66mm / 2.6" 

ISCG MOUNT

none


FRAME

CONSTRUCTION

& DETAILS


.Hi tensile
.HT & DT gussets
.TT/DT & ST/CS Bridge
.Tapered chainstays


FORK

CONSTRUCTION


.Hi tensile
.Threadless steerer w/star nut
.Taper blades w/ peg recesses




Terms of use

Warranty claims will only be handled through the appropriate channel which is our online form. If you do not supply all of the requested information, your claim may be rejected. Please go to stomp-group.com 


Completes & parts

6 months manufacturer?s warranty covers unexpected failure/defect of all parts/components that may not be attributed to fair wear and tear, or crash damage outside that considered normal use. The claimant must be the original owner/purchaser and produce a receipt to prove the date of purchase. The parts/components must be free from modification including shot blasting and/or painting/powder coating where this may be attributed to the failure.


Important - 1 week service

As your bike will have been sent to you via mail order, it is your responsibility to ensure it has been assembled correctly. We allow you to assemble by yourself. However you must get a 1 week service by a qualified bicycle shop technician in order to qualify for your warranty. This is to ensure you have assembled your bicycle correctly and that everything is adjusted correctly e.g. spokes will need tightening, maybe your chain is too loose, brakes not set correctly, tyre pressure incorrect etc. If you do not have your 1 week service record (signed and stamped receipt), then your warranty is invalid.


Examples of items not covered by your warranty:


  • worn tyres
  • worn/broken chains (unless clearly a manufacturing defect)
  • worn sprockets
  • worn bearings or hub internals
  • bent forks / frame / bars / axles / cranks / pedals
  • buckled wheels 
  • worn brake cables


Examples of items that are covered where it is clear there has been no abuse or misuse 

(note: you will need to supply photos of both sides of your bike & then may further be asked to return the failed component):

  • cracked or broken frames
  • cracked or broken forks
  • cracked or broken bars
  • cracked or broken hubs
  • internal axle failure bb/wheels
  • visible manufacturing defects to any part or component (should be reported as soon as noticed)


If a repair or replacement is not possible Mafiabikes reserve the right to offer an alternative of equal or greater value (colour may vary) or a partial refund proportional to the remaining life of the product.

You are expected to keep your bike in serviceable condition. any failure attributed to incorrect or lack of maintenance will be easily detected by our engineers & in most cases rejected.

When you make a claim, you will be expected to provide photographic evidence of your complete bike (photos of both sides even if it is a single small component failure) including close up shots of the failed component(s). In most instances you will then be required to send the failed part/component back to our head office for inspection at your own cost. 

Returns
We accept returns for up to 30 days should you decide you do not want your item & it must be returned unopened, fitted or used in any original packaging. We must be informed of damaged items immediately. If there is damage to any returned parts in transit or if the value of item has been reduced as a result of over handling (for example more than you would in a shop) you may be liable for a deduction in the refund to cover our costs. Please ensure you package it well & send it back recorded delivery.