TO AVOID PURCHASING THE WRONG BYPASS PLUG PLEASE READ THE TEXT BEFORE ORDERING

Bypass plug for the Datatool S4 Red motorcycle alarm, includes one Torx T8 screwdriver. Specifically made for the removal of faulty S4 RED alarm systems (not for the Green & Yellow versions). Can be used as a diagnostic tool to determine whether a fault lies with the alarm or the bike.  No need to back trace & rewire the bike. Simply locate the alarm connection box found on the cable coming from the alarm (see photos above), using the Torx T8 security screwdriver (supplied) open the box, unplug all the connectors, install the bypass plug & away you go. The bike will now start and run as it did when it left the factory. Will bypass any bike fitted with the Datatool S4 Red apart from Triumph motorcycles fitted with the factory supplied Datatool system (Triumph do not supply the connection box with their S4 kit)

NOT FOR TRIUMPH FACTORY FITTED DATATOOL S4 ALARMS,
Click Here for the Triumph bypass plug

Not to be confused with inferior copies, this is the original bypass plug as supplied by Abacus Car Alarms not a copy with false claims like approved by Datatool (do you really think Datatool would approve a device that allows the removal of their top of the range alarm system) or nonsense claims like impedance matched to bike electrics, this is not a speaker its a simple bypass plug.

IMPORTANT NOTES:

If the bikes starts & runs but cuts out when a gear is selected means the fault is with the bike, this bypass plug will not fix this  problem. 

If the Datatool alarm functions with the remotes but the bike does not start probably indicates the fault will be with the bike.

Please note vehicle's which have been standing a long time may not easily start or start at all, this is usually due to bad fuel, gummed up carbs/injectors, dead battery, rodent eaten wiring etc etc. This plug will allow the bike to function as long as the bike is function-able.

Not for the S4 Green which does not require a bypass plug
simply unplug the alarm - The bike will start and run as it left the factory

Not for the S4 Yellow - this plug will not function with the Yellow S$ version

Having trouble with this device or need some technical advice/support - no problem, click the 'Contact Seller' link above where you can access email technical support or the our support phone number for immediate help (Telephone technical support only available between 9am-7pm Monday to Saturday - please do not call outside these hours, if not answered please leave a message, emails will be answered within 24 hours)

Money back guarantee, should you not be 100% satisfied with this product simply send it back for a full refund

Telephone & Email technical support should you have problems


This Kit Is supplied with one Torx T8 security Screwdriver & easy to follow user instructions, T8 is required to access the connector plugs

Torx T8 screwdriver not supplied with this kit

UK Royal Mail first class delivery, in many cases will be delivered next day (if ordered before 5pm or even later depending on Royal Mail collection cut off times). On some occasions & to some areas of the UK delays may occur, we try our best but once sent we are unable to control any part of Royal Mail's service which in 99% of the time gives a very efficient delivery time of one to two days (Weekends & Bank Holidays excluded). See my feedback for many satisfied customer reviews

Choose optional next day delivery below,  item must be bought and paid for by 4pm at the latest to use this service (next day delivery not applicable over weekends)