Series: A - Flat Face Higher Pressure Hydraulics Suitable for Hammer/Breaker Applications How To Use 

• Before connection, clean the flat mating surface of the quick coupling to avoid the inclusion of dirt into the circuit. 

• To connect push the male half towards the female half or vice versa. 

• Once connected, to prevent accidental disconnection, turn the external sleeve to engage lock function. 

• To uncouple turn the external sleeve until the sleeve lock groove corresponds with the safety lock ball and pull back the sleeve. Warning! 

• Do not use the female coupling disconnected with impulse pressure at high frequency. 

• Do not couple-uncouple with flow and/or pressure in the circuit. 

• Do not couple-uncouple when the temperature inside of the circuit is higher than 80°C (176°F). 

• When the couplings are disconnected, we recommend the use of protection caps. Technical Features and Options 

• Interchangeability: ISO 16028 (from size 6.3 to 25) HTMA (size 10) 

• Valve system: Flat face 

 • Mechanical connection: Locking balls 

 • Connection system: Push to connect 

 • Disconnection system: Pulling back the sleeve of the female 

 • Connection with residual pressure: Not allowed 

 • Disconnection with residual pressure: Not allowed 

 • Threads available: BSP

 • Temperature range: Standard seals NBR (Nitrile): from -20°C to +100°C (from -4°F to +212°F).

Location: C Sth B1