250W DC Spindle Motor ER11 Brushless Spindle Motor 8000RPM DC24V 10A for Router
Package Included :
1pc Spindle Motor Only Or
spindle+Controller+Clamp Or
Spindle+Controller+Clamp+Power Supply
Specifications:
SKU |
DC Spindle
Motor-250W |
DC Spindle
Motor-500W |
DC Spindle
Motor-300W |
DC Spindle
Motor-400W |
Rotating Speed |
0-8000r/min |
0-12000r/min |
0-12000r/min |
0-12000r/min |
Power phase number |
Single-phase |
Three-phase |
Two-phase |
Single-phase |
Current |
10A |
10A |
6A |
8A |
Power |
250W |
500W |
300W |
400W |
Torque |
600mN.m |
600mN.m |
400mN.m |
600mN.m |
Voltage |
24VDC |
48VDC |
12-48VDC |
12-48VDC |
Precision |
0.01mm |
0.01mm |
0.01mm |
0.01mm |
Absolute temperature rise |
15℃ |
15℃ |
15℃ |
15℃ |
Insulation resistance |
>2MΩ |
>2MΩ |
>2MΩ |
>2MΩ |
Insulation dielectric Strength |
|
600V |
400V |
500V |
Whether with Hall sensor |
Yes |
Yes |
No |
No |
Chuck |
ER11 Collet 3.175mm(0.125inch) |
Diameter |
42mm(1.65inch) |
|
52mm(2.05inch) |
52mm(2.05inch) |
Motor length |
85mm(3.34inch) |
|
90mm(3.54inch) |
120mm(4.72inch) |
Total length |
110mm(4.33inch) |
|
175mm(6.89inch) |
205mm(8.07inch) |
Weight |
0.8kg |
1.4kg |
0.8kg |
1kg |
Application field : Widely used in many
fields such as engraving machine, cutting machine, advertising special-shaped
cutting
machine, PCB proofing machine, bead machine, woodworking machinery and
so on
Advantages :
[250W]
250W brushless DC high-speed motor, super long life, super quiet
[No Carbon Brush,
Low Interference] This motor does not contain carbon brushes and it
will not generate electric sparks during
operation, which greatly reduces the
electric spark's interference to remote control radio equipment.
[Long life and low
maintenance cost] This motor has no carbon brushes, and its wear is
reduced. From a mechanical point of
view, the brushless motor is almost a
maintenance-free motor. When necessary, just do some dust removal maintenance.
[Hall signal]
This motor with Hall signal sensor, 3 power lines, 5 signal lines
[New mold cooling
fan] High concentricity, no resonance; strong wind, low temperature
rise
[High-precision
ER11 chuck] The default standard configuration is 3.175mm
[Multi-function driver] DHK2425 driver has
the function of forward and reverse rotation, start-stop function, built-in
potentiometer
speed control function, external potentiometer speed control
function, alarm output function, under voltage/overvoltage protection
function;
current limit/overcurrent protection Function; locked-rotor protection function.