Selleys Liquid Nails is a high strength multipurpose construction adhesive that forms a strong and lasting bond on most building substrates.
Can be used in:
Sheet flooring to joists
Metal or aluminium door strips to floors or walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite to timber
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibro or plaster
Tempered hardboard to floorboards
To eliminate the squeaks in tongue and groove boards
How to use:
Ensure surfaces are free from oil, grease and dust. Wipe off any pooled water from wet timber.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun.
Apply bead using a caulking gun, along the length of joist, stud or batten. On broad flat surfaces apply beads every 40cm.
Position pieces and press firmly together. Fix with sufficient nails, screws or clamping to hold the load and achieve contact over the total bond area. Repositionable for up to 20 minutes after fitting.
Allow adhesive to set (minimum 24 hours**) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high-stress applications.
Features:
Strong bond – which is flexible enough to respond to movement allowing a strong bond to be maintained.
Adheres well to wet and dry timber, so there is no need to wait for the timber to dry.
Easily extruded and easy to use at low temperatures.
Paintable when dry, to give you a neat, quality finished job.
Doesn’t drip, sag or string, so there is less mess when you are using the product.
Bridges gaps on rough and ill-fitting construction materials.
Meets requirements specified by Australian Standard AS 2329-1999.