Digital Exhaust Temp Gauge EGT Pyro Hilux Patrol Amarok 4WD Turbo Diesel Petrol
 
1/8 npt sensor digital exhaust temperature gauge red display,digital temperature gauge

Features:
Digital display wit

red LED.
Used to measure the oil pressure of automobile.
Measurement range is 0~1000C
High accuracy and easy operation.
Specification
Unit: C
Measurement range: 0~1000C
Power: 12V DC, Max. 0.3A
Sensor mounting thread: NPT 1/ 8 "
meter size: 5*3.4*1.3cm/2*1.3*0.5in(L*W*H)

NOTE:

BOOST GAUGE :-14 psi~ 40 PSI

EXHAUST TEMP GAUGE:0~1000C

WATER TEMP GAUGE:0~100C

OIL PRESSURE GAUGE:0~8 BAR


Package including:
1 X exhaust temperature gauge

1 X exhaust temperature gauge sensor


Installation:


1) Red wire > connect to + 12 volts on the "Ignition On" circuit of the vehicle. 
(This will only allow the gauge to indicate when the car is ready to be started and when the vehicle is running.)

2) Black wire> connect to the -negative pole of the battery or to a good chassis earth.


Probe Leads Connection:

1) Simply plug together the 2 pats of the IP65 connector or:


NOTE: Because most vehicles do not offer a large hole size access point through there firewall for this connector to pass through, it may be necessary to cut the IP65 connector wires off ( ) to route the leads through to the display.

If this is necessary, observe the colour code connection of each wire BEFORE you are cut so they realign in there correct order and allow a 20mm length tail on each lead out of the connector so that a soldered reconnection can be made.