Dear valued buyer, thank you for viewing our page. We will provide you best service and high quality products.We promised all the Items will be tested earnestly before shipping, ensure it 100% working in orders..



If you're about our item have any concern, please don't hesitate to contact us. Since the time difference, perhaps we'll reply you late for several hours, thank your very much for your understanding.


Notes:
A. The battery is not included and Customs don't allow.
B.If the motherboard can't work correctly, please first check your CPU whether can be compatible with our motherboard, then check your video card or power supply.
C.Please DO NOT use single-side memory, most motherboards can't support such memory.
D. We DO use genuine brand memory, please do not use fake memory or if you're not sure whether your memory fake or not, please do not try it on our motherboard.


Package include:
1* motherboard
2* SATA cables
1* I/O pannel


Gigabyte GA-Z87X-UD3H Motherboard Introduction

 

CPU
  1. Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1150 package
  2. L3 cache varies with CPU

(Please refer "CPU Support List" for more information.)

Chipset

Intel® Z87 Express Chipset

Memory
  1. 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. Dual channel memory architecture
  3. Support for DDR3 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer "Memory Support List" for more information.)

Onboard Graphics

Integrated Graphics Processor - Intel® HD Graphics support:

  1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200at60 Hz
  2. 1 x DVI-D port, supporting a maximum resolution of 1920x1200at60 Hz
    * The DVI-D port does not support D-Sub connection by adapter.
  3. 1 x HDMI port, supporting a maximum resolution of 4096 x 2160 at 24 Hz / 2560 x 1600 at 60 Hz
    * Support for HDMI 1.4a version.
  4. 1 x DisplayPort port, supporting a maximum resolution of 3840 x 2160 at 60 Hz / 2560 x 1600 at 60 Hz
    * Support for DisplayPort 1.2 version.
  5. Maximum shared memory of 1 GB

Audio
  1. Realtek® ALC898 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF In/Out

LAN

Intel® GbE LAN chip (10/100/1000 Mbit)

Expansion Slots
  1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
  2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
    (The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.)
    * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.
  3. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
    * The PCIEX4 slot shares bandwidth with the PCIEX1_2/3 slots. The PCIEX1_2/3 slots will become unavailable when a PCIe x4 expansion card is installed.
    * When installing a x8 or above card in the PCIEX4 slot, make sure to set PCIE Slot Configuration in BIOS Setup to x4. (Refer to Chapter 2, "BIOS Setup," "Peripherals," for more information.)
  4. 3 x PCI Express x1 slots
    (The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.)
  5. 1 x PCI slot

Storage Interface

Chipset:

  1. 6 x SATA 6Gb/s connectors (SATA3 0~5) supporting up to 6 SATA 6Gb/s devices
  2. Support for RAID 0, RAID 1, RAID 5, and RAID 10

Marvell® 88SE9172 chip:

  1. 2 x SATA 6Gb/s connectors (GSATA3 6/7) or 2 eSATA 6Gb/s connectors on the back panel, supporting up to 2 SATA 6Gb/s devices
    * Use either the GSATA3 6, 7 connectors or the eSATA connectors at a time.
  2. Support for RAID 0 and RAID 1

Multi-Graphics Technology

Support for 2-Way AMD CrossFire™/NVIDIA® SLI™ technology (PCIEX16 and PCIEX8)

USB

Chipset:

  1. Up to 2 USB 3.0/2.0 ports (available through the internal USB header)
  2. Up to 6 USB 2.0/1.1 ports (available through the internal USB headers)

Chipset + 2 Renesas® uPD720210 USB 3.0 Hubs:

  1. Up to 8 USB 3.0/2.0 ports (6 ports on the back panel, 2 ports available through the internal USB header)

* Please download & install Win8 USB patch for better compatibility.

Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 8 x SATA 6Gb/s connectors
  5. 1 x CPU fan header
  6. 1 x water cooling fan header (CPU_OPT)
  7. 4 x system fan headers
  8. 1 x front panel header
  9. 1 x front panel audio header
  10. 1 x S/PDIF In header
  11. 1 x S/PDIF Out header
  12. 2 x USB 3.0/2.0 headers
  13. 3 x USB 2.0/1.1 headers
  14. 1 x serial port header
  15. 1 x Clear CMOS jumper
  16. 1 x Trusted Platform Module (TPM) header
  17. 1 x power button
  18. 1 x reset button
  19. 1 x Clear CMOS button
  20. Voltage measurement points
  21. 2 x BIOS switches

Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x D-Sub port
  3. 1 x DVI-D port
  4. 1 x HDMI port
  5. 1 x DisplayPort
  6. 1 x optical S/PDIF Out connector
  7. 6 x USB 3.0/2.0 ports
  8. 2 x eSATA 6Gb/s connectors
  9. 1 x RJ-45 port
  10. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller

iTE® I/O Controller Chip

H/W Monitoring
  1. System voltage detection
  2. CPU/Chipset/System temperature detection
  3. CPU/CPU_OPT/System fan speed detection
  4. CPU overheating warning
  5. CPU/CPU_OPT/System fan fail warning
  6. CPU/CPU_OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.

BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI EFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features
  1. Support for Q-Flash
  2. Support for Xpress Install
  3. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    atBIOS
    EasyTune
    EZ Setup
    ON/OFF Charge2
    USB Blocker

Operating System
  1. Support for Windows 10/8.1/8/7

Form Factor

ATX Form Factor; 30.5cm x 24.4cm

Remark

  Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.

  Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.



Shipping

Economy shipping :Usually To all countries will be shipped via AIR MAIL ,not Expedited shipping.Usually to (USA UK CA AU )need 15-25 days arrive other country 15-35 days.

Expedited shipping:USA,UK,EU, CA ,AUS ,Europe Usually need 3-5 days arrive.other country 4-7 days,(according to your country)...


Please note The customs（tariff） is not included in the item price or  shipping fees. These charges are the buyer's responsibility. Please  check with your country's customs office to determine what these  additional costs will be prior to bidding or buying.
We can not mark item as "gift", since Your Country customs and international  customs regulations prohibit such behavior, thank you for your  understanding.

After Sale:

  • Warranty:

    All items are sold with 90 days warranty unless otherwise stated in the auction


  • Returlns:

     1) In our item warranty, we can offer refund or replacement.

     2) We do the refund after we get the returned item, we can ship the replaced item after you ship the old one out.

     3) Please do not return any items without an authorization number or other instructions by us.  Any packages that are send without our knowledge  will be refused and no replacements will be issued.  Wrong item ordered  or non defective part returns require a 20% restocking fee. All products are marked with serial number and QC badge.Any products returned  without our serial number and QC badge will be rejected as not our  parts..

 

 

Our working hours are from Monday to Friday China time from 8.00 to 16.00 clocks.
If you would like to purchase a project to ask questions or concerns or items, please contact us via eBay Mail System and we will be happy to help you.
If you are working outside of your normal business hours, please wait until the next business day and we will answer your questions and resolve any questions you may encounter. Please allow us to assist you during normal business hours.
If you contact us on weekends, your questions or questions will be answered from Monday to Friday from 8 am to 4 pm during normal business hours.