Frequently used Maintenance Service and Reset can be done.
For ALL Maintenance Reset,
Compatibility depends on car's make, model, trim and made year.
1. Oil Lamp Reset:
allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2. EPB service:
Helps maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
3. BAT battery service:
allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4. DPF service:
specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5. SAS service:
helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6. TPMS service:
makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7. IMMO Service:
It is mainly used to disable the lost vehicle keys and match a new replacement key fob.
Note: It can NOT make new key, can NOT do key coding.
Another tool is for making, programming, coding new keys. Click here to check.
8. ABS Bleeding:
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system
9. Sunroof Reset:
The sunroof memory generally needs to be reset when the vehicle’s battery is replaced or the car dies
10. Suspension Reset:
Try reset electronic suspension air ride with the massage system close all doors koeo flip through message system go to suspension reset or on off
11. Gearbox Reset:
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12. AFS Headlamp Reset:
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel
13. Injector Coding:
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off
14. Throttle Adaptation:
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair
15. Gear Learning:
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running
Below reset are newly added to this tool, Free for lifetime
16.AC System Relearn/Initialization
17.AdBlue Reset
18.A/F Reset
19.Coolant Bleed
20. Language Change
21.NOx Sensor Reset
22.Seats Calibration
23.Stop/Start Reset
24.Transport Mode
25.Tyre Reset
26.Windows Calibration