Bottom View
Safety Features
- Water-resistant, firm ABS plastic casing.
- Built-in PCB protection.
- Prevent short circuit, over-current, over-heat, over-charge, and over-discharge.
- The internal pack is stabilized by braces, thereby avoiding mechanical accidents caused by vibration.
Battery Specifications:Chemistry | |
Voltage | - Nominal Voltage: 36 V
- Minimum Voltage: 30V
- Maximum Voltage: 42V
|
Capacity | |
Size | - 260.00 x 148.00 x 56.00 mm
- ( or 10.2" x 6" X 2.2")
|
Weight | |
Operate Temp. Charge | |
Operate Temp. Discharge | |
Storage Temp. | |
PCB Safety Function | - Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
DC Power ConverterThis DC to DC power adapter can convert 36V /48V battery output voltage to 24V DC power. Maximum output 6A (144W). Its input voltage range is between 32V to 55V. Its output voltage is 24V, maximum output current is 6A (144W)
A special CPAP dongle can plug over the output connector to make it compatible with ResMed Airsense 10 series CPAP machines:
This DC converter start up voltage is 32V
. Its cut off voltage is 29V. This means the converter will start to work when input voltage is 32V or higher. After it starts working, it will keep working until input voltage drop to 29V.
A typical 36V lithium ion battery ( 10 cells in serial) output voltage range is 30V to 42V. A
typical 48V lithium ion battery ( 13 cells in serial) output voltage range is 39V to 54.6V. So this converter works for both 36V and 48V lithium ion batteries.
This DC to DC power adapter's input side has two 16AWG wires with Anderson Power Pole connectors. The output is a 5.5 x 2.5mm male barrel connector with 16AWG wires. It is very easy and flexible to connect with batteries and other power source.
Features:
Wide input range: 30V ~ 55V
Start up voltage: 32V
Input Connector: Anderson Power Pole
Input Wires: 16AWG, Length: 300mm
Output Voltage: 24V, Maximum 6A ( 144W)
Output Connector: 5.5 x 2.5mm Male
Output Wires: 16AWG, length: 900mm
High efficiency ( > 90%)
Small size: 2.98” x 2.98” x 1.3” (74 x 74 x 32.5 mm)
Light weight: 10.2 oz (289g )
Input: The red color is for Positive input and the black color is for Negative/Ground input. It is CRITICAL that the power adapter is connected correctly in polarity
to the power source: Positive on adapter connects to Positive on power source. Negative on adapter connects to Negative on power source. FAILURE TO DO SO MAY RESULT IN SEVERE DAMAGES.
Safety Protections:
Compare to similar DC converters on market, BiXPower has added many extra safety protection functions on this converter, such as
1. Output over current protection
2. Output over voltage protection
3. Output over load protection, Auto-recovery when device is back to normal operating,
4. Over-temperature.(V) --- Chip IC has the over heating protection function.
5. Output Short Circuit protection
Technical Specifications:- Acceptable Input DC Voltage Range : 30V ~ 55V
- Start up voltage: 32V
- Output power(max) 144W
- Output voltage: 24V
- Output current: Max. 6A*
- Efficiency: > 90%
- Input wires: 16AWG, length: 300mm
- Output wires: 16AWG, length: 900mm
- Weight 10.2 oz (289g )
- Dimension 2.98” x 2.98” x 1.3” (74 x 74 x 32.5 mm)
*6A is its maximum output current, not actual output current. Actual output current depends on the device's requirements. For example, if your device requires 2 Amps, it will output 2 Amps.
Package Contents:300Wh 36V Battery: x 1
Battery AC Charger: x 1
36V to 24V DC Converter x 1
Special CPAP Dongle x 1