Technicqll Aluminium Cold Weld Meta Bearing Bolts Epoxy Repair Glue Paste E-433

Technical description
Metal adhesive two-component epoxy paste Epoxy Steel, 100g, application: cracks, leaks, vertical application; for mechanical processing, for overpainting, steel

PARAMETERS

Color: silver-gray

Pot life after mixing: 30 minutes

Pre-hardening: 120 minutes (at 20C)

Total hardening: 24 h

Shear strength: 11.0 MPa

Temperature range: -40C to 120C

Validity period: 36 months

FEATURES

Does not contain solvents

Easy to use

Thixotropic consistency

Contains reinforcing fibers

Resistant to water and temperature

It allows the regeneration of expensive components

Resistant to aggressive chemicals

APPLICATION

Aluminum paste is a two-component, thixotropic composite. Designed for the repair and regeneration of components and parts made of light alloys, steel, cast steel, cast iron and non-ferrous metals. Once fully hardened, it can be subjected to mechanical treatment. It is resistant to atmospheric agents, temperatures and aggressive chemicals (acids, alkalis, solvents, petrol). Thanks to its properties it is an alternative to costly repairs. It is widely used in car workshops, industrial plants as well as in households.

Typical applications include:

Repair and regeneration of cracked castings

Filling of metal alloys

Regeneration of damaged and worn shafts

Removal of casting defects in castings made of cast iron, cast steel and non-ferrous metals.

BENEFITS

Safe to use

Just mix and apply

Does not drain from vertical surfaces

Weld reinforcement effect

For indoor and outdoor use

Saving money

For use in industry

HOW TO USE

Sand the surface with abrasive paper or a file

Remove any dirt and degrease (use the P-102 Cleaning Kit or P-959 Technical Cleaner).

Prepare a bowl to mix the ingredients

Apply two equal volumes of ingredients A + B using different spoons - if in doubt, use less hardener (component B)

Mix thoroughly to obtain uniform color and uniform consistency without streaking and air bubbles

Mix the ingredients on the repaired component, first filling the slots and recesses

Make repairs within 30 minutes of mixing the ingredients.

You can use the T-048 Glass Grid to reinforce the repair area.

ADVICE AND TIPS:

Drain the containers in hot water for about 5 minutes before mixing. The heated ingredients are easier to pull out of the containers and are easier to mix

Do not mix more components A and B than they can wear in 30 minutes (lifetime).

Repair time can be shortened by directing a stream of warm air to the repaired place.

Excess and residue of the paste can be removed with an organic solvent.

STORAGE:

Store at 5 ° C to 25 ° C. Protect from moisture.