HSS steel with 5% cobalt to increase stability and service life.
Point angle of 135 ° for optimal chip removal.
Fully milled with an amber colored surface.
Manufactured according to din 338.
The HSS metal drill for solid work with metal The manufacturing process with low temperature makes the drill highly elastic and reduces the risk of breakage The spiral groove with oxide coating ensures fast chip removal and reduces wear The resistant core with pronounced hardness at the point of attachment ensures greater durability.
Product details
The HSS metal drill does a solid job for standard tasks such as drilling through metal. The low-temperature manufacturing process makes the drill highly elastic and reduces the risk of breakage. The spiral groove with oxide coating removes drilling chips quickly and reduces wear. In addition, the resistant core with pronounced hardness at the point of attachment ensures greater durability. It is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and plastic. The shaft of the drill is cylindrical (the shaft diameter corresponds to the drill diameter). The drill is used with drill stands and drill drivers.
diameter
Diameter diameter diameter diameter diameter | overall length |
1.0mm | 34mm |
1.5mm | 40mm |
2.0mm | 49mm |
2.5mm | 57mm |
3.0mm | 61mm |
3.2mm | 65mm |
3.5mm | 70mm |
4.0mm | 75mm |
4.5mm | 80mm |
5.0mm | 86mm |
5.5mm | 93mm |
6.0mm | 93mm |
6.5mm | 101mm |
7.0mm | 109mm |
7.5mm | 109mm |
8.0mm | 117mm |
8.5mm | 117mm |
9.0mm | 125mm |
9.5mm | 125mm |
10.0mm | 133mm |
10.5mm | 133mm |
11.0mm | 142mm |
11.5mm | 142mm |
12.0mm | 151mm |
12.5mm | 151mm |
13.0mm | 151mm |