CTEK PRO25S 40-194 12V 25A Charger Power Supply Recondition For Workshops

Workshop and professional use

8-stage charger - 25 amps - 12 volts - 40-500Ah + continuous current function + recondition!

High-tech 8-stage fully automatic battery charger. Ideal for cars, boats, mobile homes, caravans, agricultural machines and much more. Also as 12V continuous current / power supply up to max. 25 amps switchable! Extends the service life and increases the performance of the battery.

The PRO25S from CTEK is an innovative, versatile and highly efficient charging and power supply device with 25 A. It meets the professional requirements of the automotive industry. The PRO25S is characterized by its strong performance and sophisticated technology. It is safe and portable as well as flexible and usable for all 12 V vehicle batteries including lithium-ion batteries (LiFePO4). In short - the perfect solution for professional battery charging in the workshop and salon.
FOR DAILY PROFESSIONAL USE

Sophisticated technology ensures that each battery is charged safely and quickly according to its individual needs. The special reconditioning program of the PRO25S for lead-acid batteries restores discharged batteries and reconditions exhausted batteries. The SUPPLY mode supports the battery during diagnostic work and troubleshooting. The device has low voltage and current ripples and is therefore safe for the sensitive vehicle electronics. It works fully automatically, is easy to operate and connect, and is spark-proof and reverse polarity protected to protect the user and the battery from damage. The design of the PRO25S stands for easy handling in workshops and salons. It is light and portable, but with its robust and impact-resistant housing, the device can withstand the toughest conditions.
Highlights

    Suitable for 12 V batteries of all types: wet cells, Ca / Ca (calcium), gel, AGM, EFB and lithium-ion (LiFePO4)
    Special lithium-ion mode (LiFePO4)
    Compatible with batteries from 40 Ah to 500 Ah (LiFePO4: 30 Ah to 450 Ah)
    SUPPLY mode supports the battery during diagnostic work and troubleshooting
    Fully automatic and easy to use. Easy to connect, protected against sparks and protected against polarity reversal
    Integrated safety functions protect the vehicle and battery
    Integrated temperature sensor for maximum charging result
    Special reconditioning program for restoring discharged batteries and reconditioning exhausted batteries
    Certified to IP44 for outdoor use
    Lightweight and extremely portable
    Robust and tough

Especially workshop and service use as backup voltage for vehicles and battery replacement (radio code and memory are retained). Ideal for buffer operation of modern CAN-BUS vehicles, whose high power consumption quickly drains the vehicle battery.

The former MXS25, now the PRO25S, can easily be set automatically for different types of lead-acid batteries and open, MF, GEL and AGM, batteries from 40-500 Ah. Suitable for all lead-acid types.

The PRO25S is the perfect choice for batteries that need to be charged quickly, including starter, caravan, boat and workshop batteries.

The temperature sensor adjusts the charging voltage to the temperature of the battery in order to guarantee an effective charging process in all climatic conditions.

With the SUPPLY mode, the charger supplies CONTINUOUS POWER without a battery being connected. The use of SUPPLY mode is essential when replacing batteries, as this way no program settings that are difficult to restore are lost.

With the RECOND mode you can reverse the acid stratification that often occurs with deeply discharged batteries. This will restore the power of the battery and extend its service life.
SCOPE OF DELIVERY

The CTEK PRO25S is supplied with a battery cable with pole clamps, color-coded for easy identification of the plus and minus pole. The charger also has a sensor cable attached with the battery cables. The unit automatically adjusts the charging voltage if the temperature deviates from + 25 ° C. Higher temperatures lower the voltage, lower temperatures raise it.

Subject to errors and changes - © iMS 2020

TECHNICAL SPECIFICATIONS

    INPUT 220–240VAC, 50–60Hz, 2.9A max
    OUTPUT 14.4V / 15.8V / 13.6V, 25A max, lead acid batteries. 13.8V / 14.4V / 13.3V, 25A max, LiFePO4 batteries.
    BACK DISCHARGE CURRENT * Less than 1 Ah / month
    AMBIENT TEMPERATURE -20 ° C to +50 ° C
    BATTERY TYPES All types of lead-acid batteries, lithium-ion (LiFePO4) batteries, 12V, WET, maintenance-free, Ca / Ca, AGM, EFB, GEL
    BATTERY CAPACITY 40–500 Ah, lead batteries. 30–450Ah, LiFePO4 batteries.
    PROTECTION CLASS IP44
    STARTING VOLTAGE 2.0V
    RIPPLY ** Less than 4%
LENGTH OF THE CHARGING CABLE 2000 mm (DC cable)
POWER CABLE LENGTH 1900 mm (AC cable)
TEMPERATURE COMPENSATION Connected external charging voltage temperature compensation sensor
NET WEIGHT IN KG (DEVICE WITH CABLES) 1.8 kg
GROSS WEIGHT IN KG (DEVICES WITH PACKAGING) 2.2 kg
DIMENSIONS IN MM (LXWXH) 235 x 130 x 65 mm