Important: The HSS-R drills with reduced shank have a shank of 10 mm from 10.5 mm to 13.5 mm.
From 14 mm a shaft of 13 mm HSS-R drill
Point angle 118 degrees HSS (high performance high speed steel) Suitable for: steel, aluminum, brass, etc. Roll-rolled according to din 338 Surface: black, polished HSS-G twist drill din 1869 extra long Ground, bright, 135 ° point angle, from 3.0 mm cross-point Areas of application: Materials up to approx. 900 N / mm2 alloyed and unalloyed steels, cast iron, steel Sintered metals, non-ferrous metals Titanium drill bits - HSS-TiN din 338 - metal drill bits - stainless steel drill bits 1 - 13 mm High-speed steel, cylindrical, short version, right-hand cutting, type N, Point angle 118 °, cross-point according to din 1412 C, gold-colored surface. Use: For heavy use and a significantly longer service life. For drilling work in metal such as steel, stainless steel V2A - V4A, gray cast iron, sintered iron, aluminum, brass, copper, wood, plastics and of course all other materials etc. until about. 900 N / mm² diameter | overall length | 1.0mm | 34mm | 1.5mm | 40mm | 2.0mm | 49mm | 2.5mm | 57mm | 3.0mm | 61mm | 3.2mm | 65mm | 3.5mm | 70mm | 4.0mm | 75mm | 4.5mm | 80mm | 5.0mm | 86mm | 5.5mm | 93mm | 6.0mm | 93mm | 6.5mm | 101mm | 7.0mm | 109mm | 7.5mm | 109mm | 8.0mm | 117mm | 8.5mm | 117mm | 9.0mm | 125mm | 9.5mm | 125mm | 10.0mm | 133mm | 10.5mm | 133mm | 11.0mm | 142mm | 11.5mm | 142mm | 12.0mm | 151mm | 12.5mm | 151mm | 13.0mm | 151mm |
13.5mm | 160mm | 14.0mm | 160mm | 14.5mm | 169mm | 15.0mm | 169mm | 15.5mm | 178mm | 16.0mm | 178mm | 16.5mm | 184mm | 17.0mm | 184mm | 17.5mm | 191mm | 18.0mm | 191mm | 18.5mm | 198mm | 19.0mm | 198mm | 19.5mm | 205mm | 20.0mm | 205mm | 21.0mm | 205mm | 22.0mm | 210mm | 23.0mm | 215mm | 24.0mm | 220mm | 25.0mm | 220mm | 26.0mm | 235mm | 27.0mm | 235mm | 28.0mm | 235mm | 29.0mm | 240mm | 30.0mm | 240mm |
| Click on an image to enlarge it |