INSTRUCTIONS ACTIVATION AND RESET PROCESS
* Connect the printer to the PC using an appropriate USB cable and turn on.
* Deactivate the antivirus or put the program in exclusions.
* Disconnect the other printers, keep only the printer connected to reset
* You must install WinRAR or WinZIP decompressor program
STEP 1.- Download the rar or winzip file from the download link
provided by the seller!
STEP 2.- Extract the contents of the file in a single folder.
STEP 3.- Run the file AdjProg.exe (as admin Win7-8-10-11)
STEP 4.- Click on “Accept"
STEP 5.- Click on (Select)
In (Port) select SC-P400/407 & OK
STEP 6.- Click on “ Particular adjustment mode
STEP 7.- In Maintenance select " Waste ink pad counter" and OK
STEP 8.- Check the boxes and click on "Check"
STEP 9.- Re-check the boxes and click on "Initialize
STEP 10.- Then it will give a message to shut down, first, turn off the printer and close the program, wait 2 minutes and then turn ON the printer.
Ready, the printer will work again!
WARNING: Save the file for an upcoming use!
The program does not solve the general error, maintenance box, ink levels, cartridges or other failures.
===NOTE===
Communication error (error 20000107 - 2000069) I will name some that you should solve:
1.- USB cable in poor condition or not connected 2.- Change USB port and restart your pc
3.- Pending impressions
4.- Other printers connected, you must disconnect all and leave only the one to be reset
5.- Original drivers absent or in conflict with others 6.- Antivirus
7.- Firewall
8.- Run as admin. 9.- General error