KickAss 20A 24V / 12V MPPT Solar Charge Controllers

Features: The KickAss 20A 12/24V MPPT Solar Controller features the most advanced dual-peak / multi-peak tracking technology available on the market. Highly Efficient MPPT With a high tracking efficiency rating of no less than 99.5% and a peak conversion efficiency rating of 98%, you can rest assured knowing you’ve got the best of the best charging your dual battery system. The KickAss 12/24V MPPT Solar Controller range accurately recognizes and tracks multiple power points and features a built-in self diagnostic technology that can help prevent damaged caused by installation and system failures. Battery Temperature Sensor Including a Temperature Sensing Probe, when connected from the KickAss 12/24V MPPT Solar Controller to your battery, the MPPT unit will limit the amount of current output to your battery, to prevent overheating and over-charging in the event there is a fault with the connected battery LCD Display With an easy to read LCD display, the KickAss 20A 12/24V MPPT Solar Controller will dynamically display all of the most important charging information (Please Note the LCD is not backlit). Pair with either: KickAss Bluetooth LED Remote Control Display KickAss Bluetooth MPPT Module For ease of viewing when your controllers are in tight spots. Both of these devices can connect to the SRNE App on your smartphone, for even more convenience! **Please Note: this unit is not a full battery management system, it is simply an MPPT with a load output** Key Features: 99.5% Tracking Efficiency 98% Peak Conversion Efficiency Built-in Self Diagnostic Technology LCD Easy Read Display LED Indicators for Charging, Battery, Load and Faults RJ12 Communication Interface Temperature Sensing Probe Lithium Compatible Electronic Protections: Input Power Limit Protection Battery Reverse Polarity Protection Solar Input High Voltage Protection Solar Input Short Circuit Protection Solar Panel Reverse Polarity Protection Load Overpower Protection Load Short Circuit Protection Reverse Charge Protection Over Temperature Protection for internal heat protection of the MPPT unit Over Temperature Protection for your battery (Temperature Sensing Probe must be attached) Please Note: This MPPT Controller is not waterproof. This unit is not a full battery management system, rather a charge controller that can supply power to small accessories such as LED lights. Due to the relationship between the load output and solar input (daylight/darkness etc) the load output does not supply consistent power suitable for operating appliances such as a fridge/freezer. We therefore do not recommend connecting electronics such as a fridge/freezer that require reliable consistent power directly to the MPPT Solar Controller. Instead, all accessories should be directly connected to your battery bank via appropriately fused circuits.Specifications Electric Parameters   Parameter Value Model KA1224MPPT20A KA1224MPPT40A System Voltage 12V / 24V Auto No-load Loss 0.7W to 1.2W Battery Voltage 9V to 35V Max. Solar Input Voltage 100V (25℃) 90V (-25℃) Mx. Power Point Voltage Range Battery Voltage +2V to 75V Rated Charging Current 20A 40A Rated Load Current 20A Max. Capacitive load Capacity 10,000uF Max. Photovoltaic System Input Power 260W/12V 520W/24V 520W/12V 1040W/24V Conversion Efficiency ≤ 98% MPPT Tracking Efficiency ＞99% Temperature Compensation Factor -3mv/℃/2V (default） Operating Temperature -35℃ to +45℃ Protection Degree IP32 Weight 1.4 KG 2 KG Communication Method RJ12 Altitude ≤ 3000m Product DImensions 210*151*59.5mm 238*173*72.5mm