Function

Description

Model

 ETCR6100

CT Size

 30mm×35mm

Range

 DC/AC 0.0A～1000A

Accuracy

 ±2%rdg±3dgt

Resolution

 0.1A

Meter Size

 175mm×70mm×38mm

Meter Weight

 200g

Working Current

10mA

Function

Measurement of DC current, AC current, peak hold, on-line monitoring

Power Supply

 6LR61 9V（not included）

Test Mode

 Clamp CT, Non-contact measurement

Display Mode

 4digits LCD display

LCD Dimension

 35mm×21.5mm；display area：32mm×15mm

Sampling Rate

 About 2 times/s

Frequency

 AC 45Hz ~ 400Hz

Polar Indication

 Automatic identification for DC current detecting, display "-" symbol

Wire Position

 The tested wire should be in the center of the clamp jaw, clamp with off-center position will increase the error for max 1.5%rdg

Shift

 Automatically

Line Voltage

 Line measurement below DC 600V

Software

 Yes, the storage data of the meter can upload to computer by software

Data Storage 

 99 groups, flashing display FULL symbol indicate storage is full

Peak Hold

 Peak value capture and hold function, during the testing, long press the HOLD key to display the peak value.

Data Hold

 Data hold function: DH symbol display

Overflow display

 Exceed measure range overflow function: OL symbol display

Auto Shut Down

 5 Minutes after power on, the meter shuts down automatically without any operation to reduce battery consumption

Battery Voltage

 While battery voltage decreases to around 7.2V, will display low battery voltage symbol“    ”, and remind to replace the battery

Working Temperature

 -10℃ ~ 50℃,below 80%rh

Limit Temperature Error

 -10℃～0℃ and 40℃～50℃, the maximum increase in error is 2%rdg

Storage Temperature

 -10℃ ~60℃,below 70%rh 

Insulating Strength

 AC2KV/rms (between the core and outside shell)

Suitable Safety Standard

IEC1010-1、IEC1010-2-032、pollution, etc 2、CAT Ⅲ(600V)