2x LED Remote Control 5050 RGB Color Changing Car H7 27SMD Head Fog Lights Bulbs
Note:
*
Please check Socket of your old lamp before purchasing
!
*This Bulb is not for headlight or high beam light !
*Remote controller not including battery !
Description:
*Low power consumption, ultra long lasting design. Energy saving, environmental protection
*Stable performance, installed simply, good looking and utility. Increase safety when driving at nigh
*Can replacement of Fog light ,Reverse Lights or Daytime Running Light (DRL) etc
Specification:
Bulb Type: H7
LED Type: 5050 27SMD/PCS
Color: Multi-color ( RGB )
Life: Up to 30,000 Hours
Improvement: Increase Visibility at Night
Features:
Direct Plug In Replacement (HID Kit is not needed)
No Modification, Cutting, or Drilling Required
1. We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours during working days.
2. Before payment,Please keep the consistency of Paypal address and ebay address.
3. Quantity orders are welcome!
1. All items will be shipped in 24 hours after receiving your payment during working days.
2. To US, it usually takes 8-12 working days to deliver from China.
3.
International delivery usually takes 7-19
working days to deliver from China
, in some rare cases, it might take 12-22 business days to deliver from China.
4. Any problems about shipping, please contact us firstly. We will help to solve it ASAP.
1. If you have any issues with the product or want return, please contact us firstly. We will help to solve it ASAP. Communication makes life better.
2. We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order.
1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
2. We maintain high standards of excellenceand 
strive for 100% customer satisfaction! 
Feedback is very important to us. We request that you contact us immediately Before you give us neutral 
or negative 
feedback, so that we can satisfactorily address your concerns.
Q1: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
Q2: My item has not arrived, what's taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
Q3: Do I need to mention the Year, Make and Model in the notes when place order?
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
Q4: My bulbs won't fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
Q6: WARNING ABOUT POLARITY
Unlike halogen bulbs, HID&LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
Q2: My item has not arrived, what's taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
Q3: Do I need to mention the Year, Make and Model in the notes when place order?
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
Q4: My bulbs won't fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
Q6: WARNING ABOUT POLARITY
Unlike halogen bulbs, HID&LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
