Features:
TV Wall Mount Tilt Swivel Bracket for 10"-26" Plasma LCD LED TV
A high quality wall mount bracket for LED, LCD and Plasma TV's.
Made of cold steel that is strong enough to hold the described TV weight.
Level adjustment feature allows you to set your TV at the level of your comfort.
Multi directional adjustment let you adjust the screen at perfect viewing angle.
Tested several times after manufacture to ensure your safety and security.
Very easy to install
Specifications:
Material: Cold Rolled Plate.
Suitable TV Screen Size: 10"- 26"
Arm Distance: 400mm
Tilting: Up -15°/ Down +15°
Swivel: +90° to -90°
Load Capacity: 10KG (22 LBS)
Size: 75x75mm, 100x100mm
Package Contents:
10-26 Inches Tilt Swivel TV Wall Mount Bracket
Includes Wall Mount Bracket Fitting Screws
========================================
32-70"
Features:
- Premium quality constructed with thick, high quality steel with durable powder coated finish
- Adjustable one touch tilting for perfect viewing angle without the use of tools
- Lift and lock system secures the TV into place for additional safety
- Accurate and easy installation
- Horizontal movement adjustment for perfect screen positioning
- Cable management design: Large opening in centre of back-plate provides space for electrical wires access.
- Safety screw is used to avoid the movement of TVs after you hang it on the wall bracket.
Specification:
- Universal Plasma / LCD Wall Mount TV bracket
- Suitable for 32” to 70”
- Fits for most 32” to 70” flat panel TV
- SIZE Compliance: 200 X 200mm, 200 X 400mm, 300 X 300mm, 400 X 400, 600 X 400
- Tilt Angle: 0-15 Degrees
- Load Capacity: 110 lbs (50 KG)
Package Content:
Slim TV Wall Bracket Mount Tilt For 32 35 40 50 55 60 65 70 Inch LCD LED Plasma
TV Wall Mount Fitting Screws and Washers Included
====================================================================
10-42"
Instructions:
- Before you purchase a TV mount, make sure what kind of TV mount do you want? A Tilt & Swivel Mount, Fixed Wall Mount? Or Slim and Low Profile Mount?
- Measure your TV and choose a suitable mount to fit your TV. First, measure the dimensions between the screw holes on the back of your TV, and make sure that your measurements are SMALLER than the MAX Fitting Hole distance.
- Second, measure the weight of your TV, and compare with the Maximum Weight mentioned in the description.
Features:
- Quick and easy to install - bracket comes complete with full instructions and free fitting hardware.
- This wall mount is made from 2.0mm solid reinforced heavy-gauge cold steel.
- Compatible with 99% of all makes and models of TV within the stated size range (10" to 42") Max VESA Dimensions W200 x H200mm.
- ISO9001, TUV/GS and UL certified.
- Rigorously stress tested to ensure security, safety and peace of mind.
Specifications:
- TV Screen Size: 10"- 42"
- Wall Distance: 32mm-402mm.
- Tilt: +15° to -15°.
- Swivel: +90° to -90°.
- Load Capacity: 30 KG (66LBS).
- Mount Dimensions (W x H): 220mm x 220mm.
- Arm Length: 430mm.
- Size: 200x200mm,200x100mm, 100x100mm, 75x75mm.
- Fitting Hole Distance (W x H): Maximum 200mm x 200mm.
Package Contents:
- 1x 10-42 Inches Tilt Swivel TV Wall Mount Bracket.
- ================================================================
26-60"
FEATURES :
- Universal Hole Pattern: Random hole pattern and side to side adjustment allow mount to fit nearly all flat panel TVs.
- Performance strong: Solid heavy-gauge steel construction & durable power coated finish ensure strong performance of all the Accent TV mounts.
- Safety screw ensures the TV is safely connected to the wall mounting plate, so you don’t have to worry about accidentally knocking off the TV from the wall.
- Low-profile design ensures TV is close to the wall for a sleek finish. Open plate design assures easy access to back of the TV and cables.
SPECIFICATIONS :
- Material: 1.8mm Cold Rolled Steel
- TV Size: 26-60 Inches
- Maximum Load Capacity: 50KG (110LBS)
- Supported VESA Sizes: 75x75,100x100,200x200,400x200,300x300,400x400
SAFETY INSTRUCTIONS :
- All TV Wall Brackets should be installed on concrete wall, solid brick walls and solid wood wall. Do not install on hollow and floppy walls.
- Tighten the screw so that wall plate is firmly attached, but do not over tighten. Over tightening can damage the screws, reducing their holding power.
- Do not remove screw or loosen screw from your TV Screen until it is no longer engaged with the mount. Doing so may cause the screen to fall.
- All TV Wall mounts should be installed by trained installer specialist.
PACKAGE CONTENTS :
TV Wall LCD Led Bracket Mount Fixed Plasma 26 32 40 42 46 50 55 60 Inch
===========================================================================
32-85" MOUNT SLIM
INTRODUCTION :
TV WALL BRACKET MOUNT SLIM 3D LCD LED PLASMA FOR 32 40 50 55 60 65 70 80 85 INCH
HOW TO CHOOSE YOUR MOUNT :
- Before you purchase a TV mount, make sure what kind of TV mount do you want? A Tilt & Swivel Mount, Fixed Wall Mount? or Slim and Low Profile Mount?
- Measure your TV and choose a suitable mount to fit your TV.
- First, measure the dimensions between the screw holes on the back of your TV, and make sure that your measurements are SMALLER than the MAX Fitting Hole distance.
- Second, measure the weight of your TV, and compare with the Maximum Weight mentioned in the description.
- For more information or professional help, please feel free CLICK HERE TO CONTACT US
FEATURES :
- Mount it securely and safely to the wall using this Low Profile Wall Mount Bracket!
- This mount bracket features an ultra-slim form factor, which puts the back of the TV only about 25mm away from the wall, making it ideal for displays with side or bottom facing connections.
- The mount includes a security bracket, which prevents removal of the display from the mount (padlock not included).
- Mounting hardware is included.
- Integrated bubble spirit level assures easy installation alignment.
- Open architecture provides superior ventilation and easy access for cable management.
SPECIFICATIONS :
- Describe : Fixed TV Wall Mount
- Suitable Size : 32"- 85"
- Tilt angle : N/A
- Thickness : 1.5mm
- Material : Cold Rolled Steel
- SIZE : 200*100, 200*200, 400*200, 300*300,400*400.600*500mm
- Load Capacity : 165 lbs (75kg )
- Swivel angle : N/A
- Distance to wall : 25mm
PACKAGE CONTENTS :
- 32-85 Inches Fixed TV Wall Mount Bracket.
- Includes Wall Mount Bracket Fitting Screws
================================================================
32-85" Fixed
INTRODUCTION :
Wall Mount TV Fixed Bracket Hanging For 32-86 Inch OLED LED LCD Plasma + Stable Up to VESA 680 x 680 mm
NOTE :
These will fit 99% of most TV back as these meets VESA standard requirement.
FEATURES :
Durable, easy to install
Panel selection of high quality cold rolled steel,one stamping solid and durable
Flexible and durable,strong compatibility,excellent performance.
Wall joint,good design is reflected in every detail
Specification:
Applicable Size: 32-85 inches (depending on the installation hole spacing on the back of the TV)
Thickness:1.5 mm thick
Meets VESA standard pitch of 200×200mm, 200×400mm, 300×300mm, 400×400mm, 600x400mm, 600 x 600mm, 680x680mm
Bracket distance from the wall: 28mm
Accessories Included:
LCD TV rack special gasket: 4/group
Gasket material: ABS engineering plastic
1.Description of the action of the gasket: increase the distance from the wall of the bracket, increase the heat dissipation effect and facilitate the plugging
2. A set of screws and plastic expansion plugs (screws are commonly used, and it is not guaranteed to be completely matched with all machines)
Package Includes:
1x Wall Mount TV Fixed Bracket Including Fixings
=======================================================
|