AUTOOL SDT103 model is easy to operate. It can help you quickly and accurately find if a failure is caused by a plumbing leak, even the smallest leaks can be detected. Through the precise pressure regulation of the external air supply, The SDT103 can output the standard test pressure of 3.2kpa required for automotive EVAP systems, although the smoke volume will be relatively small
AUTOOL always selects long-lasting and durable product materials, adheres to the production process of excellence, and upholds the spirit of revolution and innovation, committing to creating products with innovative and superior quality for users.
AUTOOL SDT103 Car Smoke Leak Detector is a professional auto pipe leak detect tool and without air pump.It will help us position cars motorcycles leakage on pipe system quickly and exactly ,such as : Intake System Test, Exhaust Systems Test, Car Sealing Test, Fuel Tank System Test. Note:This unit does not have a built-in air pump, you need to bring your own air compressor to connect to the port on the back of the unit to make the unit produce smoke. If you need a device with a built-in air pump, choose SDT106 SDT203 SDT205 SDT206 Click on this link to select more |
Visual flow meter and adjustable knobSmoke output flow: up to 10 L/min. The amount of smoke output can be controlled through the flow meter and adjustable knob, which makes it easy to observe and operate. | Easy to use & High efficiencyAUTOOL SDT103 model is easy to operate. It can help you quickly and accurately find if a failure is caused by a plumbing leak, even the smallest leaks can be detected. Moreover, it can output smoke within a few seconds, significantly improving diagnostic efficiency. | Overheating and antifreeze protectionOur smoke leak detector is equipped with the latest intelligent protection devices. The equipment will be shut down for 5 minutes of continuous operation, and it needs to press the button again to restart it, so as to ensure the safety of the operator and the equipment. Our device is also suitable for low temperature operation. |
How to do leak detection?1.Fill 10ml-20ml test oil into the smoke leak detector.Disconnect the car pipelines that need to be connected to the smoke leak detector. 2.Connect the adapted quick interface to the automobile pipeline that needs to be tested.Connect an external air supply to the air inlet of the smoke leak detector. 3. Connect the smoke leak detector to the DC12V battery, and the device starts to work.Turn on the smoke switch, and smoke will be generated in about 5 seconds. 4. Connecting to the detected vehicle pipeline will soon be filled with smoke, which is convenient for locating the leak point. | Wide Range of ApplicationsAUTOOL SDT103 Car Smoke Leak Detector is a professional auto pipe leak detect tool and without air pump.It will help us position cars motorcycles leakage on pipe system quickly and exactly,is used to detect leaks in piping systems in automobiles, motorcycles, snowmobiles, ATVs, ATVs, light trucks and speed boats, suitable for all models(only for 12v DC). | Packing List : |