BEEMAX BX24026+NX24026 Peugeot 306 MAXI EVO2 1998 Monte Carlo Rally Class Winner
Include Detail Etched sheet Parts NE24026 (Accessories)
【About the actual car】
-The F2 kit car regulations set in 1994 were only for naturally aspirated engines up to 2 liters and 2WD, but the range of modification of each part was set wider than the Group A machine at that time, and several manufacturers came forward to participate. One of them is the Peugeot 306 Maxi.
-It was a rally car developed by French Peugeot in 1995 and was a FF 2WD equipped with an inline 4-cylinder 2-liter naturally aspirated engine at the front.
-The engine with advanced tuning is said to have generated 250 horsepower, and in order to make use of that power, it is equipped with an X truck sequential gearbox having a 7-speed cross ratio.
-In combination with a lightweight car body with a vehicle weight of 960 kg, sharp running is realized.
-In the tarmac rally, we showed a speed that threatened the turbo 4WD machine.
-In 1997, we further developed an evolution model that strengthened the engine.
-In the tarmac rally that competes on the paved road surface, it was noted that it showed speed equal to the more powerful lardo rally car, sometimes even more.
[About the model]
- The model is a plastic model assembly kit that reproduces the evolution model EVO2 of Peugeot 306 MAXI on 1/24 scale.
- The total length of the finish is about 166 mm, the width is about 75 mm.
-Starting with the front fender, the form unique to EVO2 is firmly expressed by adding new parts.
-It accurately models the difference with the popular 306 MAXI that is already on sale. The front is set with fog lamps using a new mold.
- You can not miss the finish of the wide body style with a much lower posture.
-In addition, the interior with the roll bar incorporated is also modeled by adding new parts to the rally equipment of EVO2. The reproduction of the lower surface of the chassis is also three-dimensional. The details also convey the nature of the run.
-The marking is driven by Jill Panizzi in the Monte Carlo Rally in 1998, and the marking of the machine that won the class championship is prepared with decals. It is a kit that can not be overlooked with a brave figure that is a little different from 4WD machine.
【Main features】
● Reproduce Peugeot 306 MAXIEVO2 on 1/24 scale ● Accurately reproduce
the form of EVO2 by adding new parts such as front air dam and rear wing ● Front fog lamps are modeled with new parts
- Roll
bar and interior rally equipment are also realistically reproduced ● New parts: rear bumper, fog lights, wheels, rear wing, interior PC parts
● Completed size: total length 166 mm
Item Size/Weight : 32.5 x 21.5 x 6.7 cm / 405g
-The F2 kit car regulations set in 1994 were only for naturally aspirated engines up to 2 liters and 2WD, but the range of modification of each part was set wider than the Group A machine at that time, and several manufacturers came forward to participate. One of them is the Peugeot 306 Maxi.
-It was a rally car developed by French Peugeot in 1995 and was a FF 2WD equipped with an inline 4-cylinder 2-liter naturally aspirated engine at the front.
-The engine with advanced tuning is said to have generated 250 horsepower, and in order to make use of that power, it is equipped with an X truck sequential gearbox having a 7-speed cross ratio.
-In combination with a lightweight car body with a vehicle weight of 960 kg, sharp running is realized.
-In the tarmac rally, we showed a speed that threatened the turbo 4WD machine.
-In 1997, we further developed an evolution model that strengthened the engine.
-In the tarmac rally that competes on the paved road surface, it was noted that it showed speed equal to the more powerful lardo rally car, sometimes even more.
[About the model]
- The model is a plastic model assembly kit that reproduces the evolution model EVO2 of Peugeot 306 MAXI on 1/24 scale.
- The total length of the finish is about 166 mm, the width is about 75 mm.
-Starting with the front fender, the form unique to EVO2 is firmly expressed by adding new parts.
-It accurately models the difference with the popular 306 MAXI that is already on sale. The front is set with fog lamps using a new mold.
- You can not miss the finish of the wide body style with a much lower posture.
-In addition, the interior with the roll bar incorporated is also modeled by adding new parts to the rally equipment of EVO2. The reproduction of the lower surface of the chassis is also three-dimensional. The details also convey the nature of the run.
-The marking is driven by Jill Panizzi in the Monte Carlo Rally in 1998, and the marking of the machine that won the class championship is prepared with decals. It is a kit that can not be overlooked with a brave figure that is a little different from 4WD machine.
【Main features】
● Reproduce Peugeot 306 MAXIEVO2 on 1/24 scale ● Accurately reproduce
the form of EVO2 by adding new parts such as front air dam and rear wing ● Front fog lamps are modeled with new parts
- Roll
bar and interior rally equipment are also realistically reproduced ● New parts: rear bumper, fog lights, wheels, rear wing, interior PC parts
● Completed size: total length 166 mm
Item Size/Weight : 32.5 x 21.5 x 6.7 cm / 405g
- It is a set of detail-up parts corresponding to the kit of Platz / BEEMAX 1/24 Peugeot 306 MaxiEVO2.
-The set has a decal set that reproduces a carbon pattern in addition to etched parts to produce a sharp finish and texture reproduction of each part.
-Etching parts include brake discs and wiper parts.
- You can enjoy a sharp finish by replacing it with plastic parts.
-In addition, the set also includes a seat belt.
-Since seat belt fittings are prepared by etching, three-dimensional reproduction is possible.
- It is a detail up parts set that I would like you to arrange with the kit by all means.
-The set has a decal set that reproduces a carbon pattern in addition to etched parts to produce a sharp finish and texture reproduction of each part.
-Etching parts include brake discs and wiper parts.
- You can enjoy a sharp finish by replacing it with plastic parts.
-In addition, the set also includes a seat belt.
-Since seat belt fittings are prepared by etching, three-dimensional reproduction is possible.
- It is a detail up parts set that I would like you to arrange with the kit by all means.
【Main Features】
● Detail-up parts for the kit of 1/24 Peugeot 306EVO2 ● Set
etched parts and seat belt parts
● With detailed Japanese instructions for
use
Item Size/Weight : 19 x 11.5 x 0.3 cm / 34g
● Detail-up parts for the kit of 1/24 Peugeot 306EVO2 ● Set
etched parts and seat belt parts
● With detailed Japanese instructions for
use
Item Size/Weight : 19 x 11.5 x 0.3 cm / 34g
BEEMAX BX24026+NX24026 Peugeot 306 MAXI EVO2 1998 Monte Carlo Rally Class Winner
Include Detail Etched sheet Parts NE24026 (Accessories)
【About the actual car】
-The F2 kit car regulations set in 1994 were only for naturally aspirated engines up to 2 liters and 2WD, but the range of modification of each part was set wider than the Group A machine at that time, and several manufacturers came forward to participate. One of them is the Peugeot 306 Maxi.
-It was a rally car developed by French Peugeot in 1995 and was a FF 2WD equipped with an inline 4-cylinder 2-liter naturally aspirated engine at the front.
-The engine with advanced tuning is said to have generated 250 horsepower, and in order to make use of that power, it is equipped with an X truck sequential gearbox having a 7-speed cross ratio.
-In combination with a lightweight car body with a vehicle weight of 960 kg, sharp running is realized.
-In the tarmac rally, we showed a speed that threatened the turbo 4WD machine.
-In 1997, we further developed an evolution model that strengthened the engine.
-In the tarmac rally that competes on the paved road surface, it was noted that it showed speed equal to the more powerful lardo rally car, sometimes even more.
[About the model]
- The model is a plastic model assembly kit that reproduces the evolution model EVO2 of Peugeot 306 MAXI on 1/24 scale.
- The total length of the finish is about 166 mm, the width is about 75 mm.
-Starting with the front fender, the form unique to EVO2 is firmly expressed by adding new parts.
-It accurately models the difference with the popular 306 MAXI that is already on sale. The front is set with fog lamps using a new mold.
- You can not miss the finish of the wide body style with a much lower posture.
-In addition, the interior with the roll bar incorporated is also modeled by adding new parts to the rally equipment of EVO2. The reproduction of the lower surface of the chassis is also three-dimensional. The details also convey the nature of the run.
-The marking is driven by Jill Panizzi in the Monte Carlo Rally in 1998, and the marking of the machine that won the class championship is prepared with decals. It is a kit that can not be overlooked with a brave figure that is a little different from 4WD machine.
【Main features】
● Reproduce Peugeot 306 MAXIEVO2 on 1/24 scale ● Accurately reproduce
the form of EVO2 by adding new parts such as front air dam and rear wing ● Front fog lamps are modeled with new parts
- Roll
bar and interior rally equipment are also realistically reproduced ● New parts: rear bumper, fog lights, wheels, rear wing, interior PC parts
● Completed size: total length 166 mm
Item Size/Weight : 32.5 x 21.5 x 6.7 cm / 405g
-The F2 kit car regulations set in 1994 were only for naturally aspirated engines up to 2 liters and 2WD, but the range of modification of each part was set wider than the Group A machine at that time, and several manufacturers came forward to participate. One of them is the Peugeot 306 Maxi.
-It was a rally car developed by French Peugeot in 1995 and was a FF 2WD equipped with an inline 4-cylinder 2-liter naturally aspirated engine at the front.
-The engine with advanced tuning is said to have generated 250 horsepower, and in order to make use of that power, it is equipped with an X truck sequential gearbox having a 7-speed cross ratio.
-In combination with a lightweight car body with a vehicle weight of 960 kg, sharp running is realized.
-In the tarmac rally, we showed a speed that threatened the turbo 4WD machine.
-In 1997, we further developed an evolution model that strengthened the engine.
-In the tarmac rally that competes on the paved road surface, it was noted that it showed speed equal to the more powerful lardo rally car, sometimes even more.
[About the model]
- The model is a plastic model assembly kit that reproduces the evolution model EVO2 of Peugeot 306 MAXI on 1/24 scale.
- The total length of the finish is about 166 mm, the width is about 75 mm.
-Starting with the front fender, the form unique to EVO2 is firmly expressed by adding new parts.
-It accurately models the difference with the popular 306 MAXI that is already on sale. The front is set with fog lamps using a new mold.
- You can not miss the finish of the wide body style with a much lower posture.
-In addition, the interior with the roll bar incorporated is also modeled by adding new parts to the rally equipment of EVO2. The reproduction of the lower surface of the chassis is also three-dimensional. The details also convey the nature of the run.
-The marking is driven by Jill Panizzi in the Monte Carlo Rally in 1998, and the marking of the machine that won the class championship is prepared with decals. It is a kit that can not be overlooked with a brave figure that is a little different from 4WD machine.
【Main features】
● Reproduce Peugeot 306 MAXIEVO2 on 1/24 scale ● Accurately reproduce
the form of EVO2 by adding new parts such as front air dam and rear wing ● Front fog lamps are modeled with new parts
- Roll
bar and interior rally equipment are also realistically reproduced ● New parts: rear bumper, fog lights, wheels, rear wing, interior PC parts
● Completed size: total length 166 mm
Item Size/Weight : 32.5 x 21.5 x 6.7 cm / 405g
- It is a set of detail-up parts corresponding to the kit of Platz / BEEMAX 1/24 Peugeot 306 MaxiEVO2.
-The set has a decal set that reproduces a carbon pattern in addition to etched parts to produce a sharp finish and texture reproduction of each part.
-Etching parts include brake discs and wiper parts.
- You can enjoy a sharp finish by replacing it with plastic parts.
-In addition, the set also includes a seat belt.
-Since seat belt fittings are prepared by etching, three-dimensional reproduction is possible.
- It is a detail up parts set that I would like you to arrange with the kit by all means.
-The set has a decal set that reproduces a carbon pattern in addition to etched parts to produce a sharp finish and texture reproduction of each part.
-Etching parts include brake discs and wiper parts.
- You can enjoy a sharp finish by replacing it with plastic parts.
-In addition, the set also includes a seat belt.
-Since seat belt fittings are prepared by etching, three-dimensional reproduction is possible.
- It is a detail up parts set that I would like you to arrange with the kit by all means.
【Main Features】
● Detail-up parts for the kit of 1/24 Peugeot 306EVO2 ● Set
etched parts and seat belt parts
● With detailed Japanese instructions for
use
Item Size/Weight : 19 x 11.5 x 0.3 cm / 34g
● Detail-up parts for the kit of 1/24 Peugeot 306EVO2 ● Set
etched parts and seat belt parts
● With detailed Japanese instructions for
use
Item Size/Weight : 19 x 11.5 x 0.3 cm / 34g
On 18-Jul-2022 at 07:09:42 BST, seller added the following information: