NEW ARUBA HP JW249A IAP-274-RW OUTDOOR WIRELESS AP WLAN AC. POINT RRP £560 Amazon.
Aruba Instant IAP-274-RW 802.11ac, 3x3:3, Wireless Access Point
The Aruba Instant IAP-274-RW 802.11ac, 3x3:3, Wireless Access Point is an Innovative and aesthetically-designed 270 series outdoor wireless access points deliver gigabit Wi-Fi performance to 802.11ac mobile devices under any weather conditions. The 270 series is also the only outdoor AP that enables 802.11n clients to operate three-times faster at greater distances. Purpose-built to survive in the harshest outdoor environments, 270 series APs withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. With a maximum data rate of 1.3 Gbps in the 5-GHz band and 600 Mbps in the 2.4-GHz band, 270 series outdoor APs supports concurrent dual-radio operation at speeds that greatly exceed Fast Ethernet.
Aruba Instant IAP-274-RW Key Features
- Innovative industrial design
- - Eliminates installation complexity
- - Inconspicuous design that improves aesthetics
- - Delivers IP66- and IP67-rated protection from the elements
- Best-in-class RF management
- - Integrated Adaptive Radio Management™ technology manages the 2.4-GHz and 5-GHz radio bands and ensures that APs stay clear of RF interference
- Reliable and predictable Wi-Fi performance
- - Patented ClientMatch™ technology ensures that roaming clients associate with the best AP to maximize performance
- - AppRF™ technology identifies and prioritizes applications on the network
- Spectrum analysis
- - Capable of part-time or dedicated spectrum analysis, which scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference
- Limited lifetime warranty – an industry first for outdoors
ANTENNAS
- AP-274: Six N-type female connectors for external antennas
- AP-275: Six integrated omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of AP-275.
- AP-277: Six integrated multipolarized directional antennas with 80º H x 80º V beamwidths for 3x3 MIMO with maximum antenna gain of 6.5 dBi in 2.4 GHz and 5 GHz.
OTHER INTERFACES
- One PoE+ PD port 10/100/1000BASE-T Ethernet network interface (RJ-45)
- One port 10/100/1000BASE-T Ethernet network interface (RJ-45)
- AC power interface, power cords sold separately
- Serial console interface (micro USB)
- Visual indicator (LED):
- - Power/system status; automatically disabled after initial operation period
Aruba Instant IAP-274-RW - Technical Specifications
ACCESS POINT MODELS
- AP-274 and IAP-274
- - 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three external antenna connectors AP-275 and IAP-275
- - 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three integrated omni-directional antennas
- AP-277 and IAP-277
- - 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three integrated 80º H x 80º V beamwidth directional antennas
WIRELESS RADIO SPECIFICATIONS
- AP type: Outdoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n
- - In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac 256-QAM modulation. This givesm TurboQAM-enabled clients a 33% boost to deliver up to 600 Mbps.
- Supported frequency bands (country-specific restrictions apply):
- - 2.4000 GHz to 2.4835 GHz
- - 5.150 GHz to 5.250 GHz
- - 5.250 GHz to 5.350 GHz
- - 5.470 GHz to 5.725 GHz
- - 5.725 GHz to 5.875 GHz
- Available channels: Dependent upon configured regulatory domain
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
- Supported radio technologies:
- - 802.11b: Direct-sequence spread-spectrum (DSSS)
- - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- - 802.11n/ac: 3x3 MIMO with up to three spatial streams
- Supported modulation types:
- - 802.11b: BPSK, QPSK, CCK
- - 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (with TurboQAM clients)
- - 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
- - 2.4-GHz band: +28 dBm (23 dBm per chain)
- - 5-GHz bands: +28 dBm (23 dBm per chain)
- Advanced cellular coexistence (ACC) feature to minimize interference from cellular systems
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay diversity (CDD) for improved downlink
RF performance
- Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
- Space-time block coding (STBC) for increased range and improved reception
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
- Explicit transmit beam-forming (TxBF) for increased reliability in signal delivery
- Supported data rates (Mbps):
- - 802.11b: 1, 2, 5.5, 11
- - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- - 802.11n: 6.5 to 450 (MCS0 to MCS23, 1 to 3 spatial streams)
- - 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, 1 to 3 spatial streams)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11ac very high throughput (VHT) support:
- VHT 20/40/80
- 802.11n/ac packet aggregation: A-MPDU, A-MSDU Power
- Maximum power consumption: 23 watts
- Direct AC source: 100-240-Volt AC
- Power over Ethernet (PoE): 48 Vdc (nominal)
Regulatory
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 60601-1-1 and EN 60601-1-2
- For more country-specific regulatory information and approvals, please see your Aruba representative.
MECHANICAL
- AP-274
- Dimensions/weight (excluding mount):
- - 23 cm (W) x 24 cm (D) x 19 cm (H) with aesthetic cover
- - 9.0” (W) x 9.4” (D) x 7.5” (H)
- - 2.7 kg/6 lbs
- - 23 cm (W) x 24 cm (D) x 14 cm (H) without aesthetic cover
- - 9.0” (W) x 9.4” (D) x 5.5” (H)
- - 2.4 kg/5.3 lbs
- AP-275
- Dimensions/weight (excluding mount):
- - 23 cm (W) x 24 cm (D) x 27 cm (H)
- - 9.0” (W) x 9.4” (D) x 10.6” (H)
- - 2.4 kg/5.3 lbs
- AP-277
- Dimensions/weight (excluding mount):
- - 23 cm (W) x 22 cm (D) x 13 cm (H)
- - 2.1 kg/4.7 lbs
ENVIRONMENTAL
- Operating:
- - Temperature: -40° C to +65° C (-40° F to +150° F)
- - Humidity: 5% to 95% non-condensing
- Storage and transportation:
- - Temperature: -40° C to +70° C (-40° F to +158° F)
- Operating Altitude: 3000m
- Chassis Rating: IP66 and IP67
- Wind Survivability: Up to 165 mph
- Shock and Vibration: ETSI 300-19-2-4 spec T41.E 4M3
REGULATORY
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 300 328
- EN 301 489
- EN 301 893
- EN 60601-1-1, EN60601-1-2
CERTIFICATIONS
- CB Scheme Safety, cTUVus
- UL2043 plenum rating
Regulatory
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 60601-1-1 and EN 60601-1-2
- For more country-specific regulatory information and approvals, please see your Aruba representative.
MECHANICAL
- AP-274
- Dimensions/weight (excluding mount):
- - 23 cm (W) x 24 cm (D) x 19 cm (H) with aesthetic cover
- - 9.0” (W) x 9.4” (D) x 7.5” (H)
- - 2.7 kg/6 lbs
- - 23 cm (W) x 24 cm (D) x 14 cm (H) without aesthetic cover
- - 9.0” (W) x 9.4” (D) x 5.5” (H)
- - 2.4 kg/5.3 lbs
- AP-275
- Dimensions/weight (excluding mount):
- - 23 cm (W) x 24 cm (D) x 27 cm (H)
- - 9.0” (W) x 9.4” (D) x 10.6” (H)
- - 2.4 kg/5.3 lbs
- AP-277
- Dimensions/weight (excluding mount):
- - 23 cm (W) x 22 cm (D) x 13 cm (H)
- - 2.1 kg/4.7 lbs
ENVIRONMENTAL
- Operating:
- - Temperature: -40° C to +65° C (-40° F to +150° F)
- - Humidity: 5% to 95% non-condensing
- Storage and transportation:
- - Temperature: -40° C to +70° C (-40° F to +158° F)
- Operating Altitude: 3000m
- Chassis Rating: IP66 and IP67
- Wind Survivability: Up to 165 mph
- Shock and Vibration: ETSI 300-19-2-4 spec T41.E 4M3
REGULATORY
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 300 328
- EN 301 489
- EN 301 893
EN 60601-1-1, EN60601-1-2
CERTIFICATIONS
- CB Scheme Safety, cTUVus
- UL2043 plenum rating
- Wi-Fi Alliance certified 802.11a/b/g/n/ac
WARRANTY
- Limited lifetime warranty