4 PCs 1.25" 5x5.5 to 5x5.5 HUB Centric Wheel Conversion Adapters

CB: 77.8MM, STUD: 9/16"-18

 Fit Chrysler: Aspen

Item Description:

    Designed to fit your vehicle's hub and wheel with perfect alignment to keep the wheel balance in check.

    Improves your vehicle’s stance by adding 1.25" width on each side.

    Makes clearance space for brakes and other suspension components.

     CNC Machined, High-Quality and Heavy Duty

    Made from High Strength 6061-T6 cold-forged billet aluminum

Item Specific:

     Vehicle Bolt Pattern: 5x5.5 (5x139.7mm)

     Wheel Bolt Pattern: 5x5.5 (5x139.7mm)

     Center Bore Size: 77.8mm

     Outer Diameter: 176mm

     Studs Thread Pitch: 9/16"-18

     Lug Nuts: 20 Pcs 9/16"-18 open end conical seat lug nuts

     Construction: High strength 6061-T6 cold-forged billet aluminum

     Hardened CR-Steel StudsForged, heat-treated and hardened ISO/DIN 12.9 grade

 Compatibility:

     Vehicle Bolt Pattern has to match 5x5.5 (5x139.7mm)

     Wheel Bolt Pattern has to match 5x5.5 (5x139.7mm)

     Vehicle Center Bore has to equal 77.8mm

     Specifically designed to fit:


MakeModelTypeYear MadeGeneration
ChryslerAspenSUV/Truck/Van2006-2009WK
DodgeDakotaSUV/Truck/Van2005-2011DN III
DodgeDurangoSUV/Truck/Van2004-2009ND
DodgeRam 1500SUV/Truck/Van2002-2010DR/DH/DS/DJ
DodgeRam SRTSUV/Truck/Van2004-2006DR/DH
Ram1500SUV/Truck/Van2011DS/DJ


   

     Vehicle compatibility, if listed, is used to match the vehicle's bolt pattern with the adapter "vehicle bolt pattern" only

     The compatibility information is for reference and not limited.

Special Notes:

      Please double check bolt patterns of your vehicle and wheels to be installed before purchasing

      Installation should be performed by a qualified technician using proper tools.

      We make no promise or guarantee that this item is compatible with your vehicle or wheels. Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above.

      Be aware that the studs on the vehicle cannot stick out past the face of the adapter, you may need to modify them by grinding/cutting/trimming.

      If there are clips or retaining rings on the vehicle's studs, they must be removed.

      It is recommended that you install the lug nuts manually, instead of with an impact gun or other electronic tool

      Your vehicle may have different thread pitch wheel studs than what is supplied with these wheel spacers. This means you need to purchase different lug nuts for proper installation.

      Reinstall and tighten all lug nuts after 50 miles and again after 1500 miles.

      No returns or exchanges once the product has been installed on the vehicle.

      Contact us if you have any questions about the product or installation.

 

Product image shown is used for description and reference only, actual item appearance may vary with bolt pattern and/or thickness.