Austria,Belgium,Bulgaria,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,
Hungary,Ireland,Italy,Latvia,Liechtenstein,Lithuania,Luxembourg,Monaco,Netherlands,Poland,
Portugal,Romania,Slovakia,Slovenia,Spain,Sweden.United Kingdom.
1 x 3.5KW ER20 Waterproof Carved metal Water cooled spindle motor ( 24000rpm, 380V/AC, 4 bearings 100x258mm,400Hz,Carved metal )
( long length and high torque )
1. 3.5kw ER20 Waterproof spindle motor 380V Water-cooled Carved metal ENGRAVING MILLING GRIND
Specification:
Material: Stainless Steel
Size: Φ 100x258mm (long length and high torque)
Power: 3.5Kw
Voltage: 380VAC
Current: 12A
Frequency: 400Hz
Speed: 24000rpm
Cooling: Water-cooled
Precision tapered bore: 0.01mm
Runout off: Less than 0.01mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4 bearings (C7005x2 + C7004x2),P4 class
Net Weight: 10.95 kg
Power supply interface: Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 is blank.
Main application: Wood, Aluminum, Stone, metal, Steel, Iron,etc hard metal
1. Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
2. Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.
3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.
Shipping
Shipping
1.) Your order we will ship it within 1-2 business days on payment received.
2.) pls double check your address when you order after, We are not responsible for wrong or undeliverable address
3.) If the order is during the weekends,it will be take extra 2 days longer
Payment
1.) We accept paypal payment,all Paypal must be confirmed (shipping and billing address must match and correct and it need tell us your telephone no for delivery)
2.) pls completed paid within 1-3 working days
Feedback
1.) we care about our valued customers,and will always try to help you,hope to establish long business with you.
2.) Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have,and will try our best to resolve the issues.
3.) Pls contact us by ebay message or email before leaving any negative feedback or opening any cases on the site,we will help you to resolve the problem,
Refund
1.) Defective or wrong item will be offered replacement or refunds after offer the pictures to prove it.
2.) When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.we will help you to solve all problems.
Feedback
1.) we care about our valued customers,and will always try to help you,hope to establish long business with you.
2.) Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have,and will try our best to resolve the issues.
3.) Pls contact us by ebay message or email before leaving any negative feedback or opening any cases on the site,we will help you to resolve the problem,