APPLICATION:

 

For 1990-1999 Chevrolet C1500/C2500/C3500

For 1990-1999 Chevrolet K1500/K2500/K3500

For 1992-1999 Chevrolet C1500/C2500 Suburban

For 1992-1999 Chevrolet K1500/K2500 Suburban

For 1990-1999 GMC C1500/C2500/C3500

For 1990-1999 GMC K1500/K2500/K3500

For 1992-1999 GMC C1500/C2500 Suburban

For 1992-1999 GMC K1500/K2500 Suburban

For 1992-1994 Chevrolet Blazer

For 1992-1999 GMC Yukon（Not Compatible on 1999 Yukon Denali）

For 1995-1999 Chevrolet Tahoe

 

REPLACEMENT PART NUMBER:15034929,15034930,5977737,5977738,5977459,5977460,5976837,5976838

 

FEATURE:

 

Chrome Housing Clear Lens

High Beam Bulb Type:HB3(9005) (bulb not included)

Low Beam Bulb Type: HB4(9006) (bulb not included)

Placement on Vehicle: Front, Left, Right

Made of material that meet or exceed OEM requirement

Type: Halogen Headlight

 

PACKAGE INCLUDES:

 

1 Pair LH (Driver Side) + RH (Passenger Side) Headlights

 

 

INSTALLATION GUIDE:

 

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

 

1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.

 

2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

 

3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

 

4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

 

5. Test your results.