eBay

MPPT Solar Grid Tie Inverter 500W 600W Pure Sine Wave for PV Input 16-180V or Battery 12-96V Adjustable Power Output

Upgraded the new adjustable power inverter,

1) It adds a solar panel and battery operation mode switch.

2) In battery mode, the knob can switch from 100W to 380W any mobilization

3) It adds to record each time you turn off the last set of power

Specifications:

Rated Power	600W
Input(DC)
PV open voltage range		26V-45V		39V-60V		55V-90V		85V-130V		120-180V
PV MAX input power(W)	700W
MPPT Voltage range(V)		22-34VDC		33-47VDC		44V-70VDC		66-100VDC		90-140V
MPP tracking efficiency	>99%
MAX.DC current(A)		30A		20A		15A		10A		10A
Suitable for Battery voltage(V)		24V		36V		48V		72V		96V
Battery Low Voltage Protection(V)		22V		33V		44V		66V		88V
Output(AC)
PV mode AC MAX output (W)	600
Battery mode Max output power			450W		450W		450W		450W		450W
AC output range	220VAC(190-260VAC) or 120VAC(90-135VAC)
Frequency range	50Hz(48~52) or 60Hz(58~62)
Power Factor	>98%
THD	<5%
Phase Shift	<1%
Stable real efficiency / 120V		87%		88%		89%		89%		91%
Stable real efficiency / 220V		88%		89%		91%		92%		94%
Other electrical data
Protection	Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection
Work Temperature	‘-25°C~ 80°C
Work Humidity	0%~90%RH non-condensing
Grade of Waterproof	Outdoor design IP22
LED Show	R&G&B LED
Cooling	Fan
Stand-by Power	<1W
Matching component:	Monocrystalline ,polycrystalline , thin-film solar panels.
Mechanical data
Net Weigtht	2.2kgs/pc
Gross Weight	2.5kgs/pc
Machine size(LxWxH)	22.2x16.2x6.5CM
Packing Size (LxWxH)	32x22x12CM

PV grid-connected inverter operating mode:

The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find.

Startup - When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition.

Grid-tied begin - Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions.

Standby - Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode.

Stop - Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode.

When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator.

Adjustable configuration panel.

Battery (battery) power output adjustment mode:

1.the adjustable knob on the inverter to the right twist,Battery power adjustment mode opens,The right of the blue LED light on,At this point the PV inverter MPPT tracking function automatically turns off,Low output machine output power of about 100W, the adjustable knob slowly twist to the right,with the output power gradually increases, the limited battery adjustable maximum output power of about 75% of the total power of the inverter (for example, 500W inverter defined variable will be around 370W, 600W inverter will be limited to 450W)

2. when the inverter is connected to the battery discharge the battery voltage is too low, The inverter will automatically stop to protect the battery output voltage is not too low,At this point you can not cut off the DC line between the inverter and battery,You can use other independent solar charge controller to the battery charge,When charging the battery is full,When 26 ~ 42V inverter connected to 24V battery:The inverter will automatically start and the net output (for example,Battery voltage into about 21V, the machine will automatically shut down, this time with another charge controller to the battery charge,When charged to about 25V, the machine will automatically begin to work), Charging without human intervention.

3.Battery (battery) mode, a plurality of sub-voltage specifications in the following table.

Battery voltage	Inverter Input	Battery Low voltage protection	Battery high voltage protection
12V battery	16V~28V	11V	14.5V
24V battery	26V~45V	21V	29V
36V battery	40V~62V	33V	43.5V
48V battery	55V~90V	44V	58V
60V battery	48V~86V	55V	72.5V
72V battery	85V~130V	66V	87V
96V battery	120V-180V	88V	120V

Shipping & Handing

Most items from our store would be shipped within 3working days upon payment verified by Aliexpress

The shipping cost quoted DOES NOT include extra charges for remote area listed by Express companies

ETA(Estimated Time of Arrival)displayed in the listing is given by shipping companies but that can not be as reason of delivery delayed dispute. We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc.

Custom Duty & Taxes

Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

Return

If you receive an item not as described,please contact us within 7 days and return the item for the correct one.

If you receive an item DOA (damage on arrival) or a defects products, please contact us. A replacement or refund will be offered after communication. Some low-valued items might not be returned.

All NON-Seller Mistake returns, shipping and handling fee would be on buyer’s account

All return products should be in original package with all accessories included.

Warranty

We stand behind our products so you are always covered!

To prove it we offer a FREE Six-MONTH limited warranty. Please read the following important details regarding the Warranty Policy.

We warrant all products to be free from defects in material or workmanship for at least 6 month from date of purchase.

We fully guarantee customers an exchange or refund within 7 business days if item DOA (damage on arrival).

Warranty excludes normal product lifetime wear-out, wear and tear or abuse.

Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.

Feedback

Please DO contact us first if there is any problem with payment, delivery or products received. Negative feedback will do no help to solve the problem.