• 1.Fitting the Following vehicle:
  • 2000-2002 Ford Excursion 1999-2004 Ford F-250 Super Duty 1999-2004 Ford F-350 Super Duty 
  • 2.Package Includes:
  • 2x Front Wheel Hub Bearing -515020
    1x Front Outer Tie Rod End - At Pitman Arm -ES3427T
    1x Front Outer Tie Rod End - Driver Side -ES3423
    1x Front Inner Tie Rod End - At Right Hand Connecting Tie Rod -DS1438
    1x Tie Rod Adjusting Sleeve - Passenger Side At Pitman Arm - 2nd Design -ES3426S
    1x Front Outer Connecting Tie Rod End - Passenger Side -DS1439
    1x Tie Rod Adjusting Sleeve - Driver Side -ES3422S 
  • Notes

    • For 99-04 Ford F-250 F-350 Super Duty 8Pcs Front Wheel Bearning Hub Tie Rod End

    1.Fitting the Following vehicle:

    2000-2002 Ford Excursion
    1999-2004 Ford F-250 Super Duty
    1999-2004 Ford F-350 Super Duty

     

    2.Package Includes:

    2x Front Wheel Hub Bearing -515020
    1x Front Outer Tie Rod End - At Pitman Arm -ES3427T
    1x Front Outer Tie Rod End - Driver Side -ES3423
    1x Front Inner Tie Rod End - At Right Hand Connecting Tie Rod -DS1438
    1x Tie Rod Adjusting Sleeve - Passenger Side At Pitman Arm - 2nd Design -ES3426S
    1x Front Outer Connecting Tie Rod End - Passenger Side -DS1439
    1x Tie Rod Adjusting Sleeve - Driver Side -ES3422S

     

    Notes

      (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
      (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.

      (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page.

     

    If you are interested with any other suspension parts, please click and save our store.

     

    Tie-Rod End Replacement Guideline:

      If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.
      This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.

    Picture(A)
    Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance.
    1.Lift the vehicle and dismount the front axle wheels.
    2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes.

     

    Picture(B)
    3.Dismount the front underride guard.

     

    Picture(C)
    4.Loosen the fastening nut from the tie rod and remove it completely.
    5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator.

     

    Picture(D)
    6.Remove the clamp of the bellow on the steering gear.
    7.Push the bellow towards the tie rod end.

     

    Picture(E)
    8.Unscrew the inner tie rod from the rack.
    9.Clean the sealing face of the bellow at the steering gear.

     

    Picture(F)
    10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle.
    Note:Always use new self-locking nuts and bolts for a reliable repair.
    11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer.

     

    Picture(G)
    12.Mount the bellow and close the clamps with the appropriate special tool.
    Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance.

     

    Picture(H)
    13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer.
    Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure.
    Tip:Secure the ball stud against twisting with a suitable tool.

     

    Picture(I)
    14.Mount the front underride guard.
    15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer.

    16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications.
    17.Perform a test drive.
    Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission.



    Payment
    • WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.
    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Contact Us
    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Shop Category
     Store Home
     Brake Rotors & Pads
     suspension kit
     Exterior
     Turbos & Parts
     Axle Housings & Parts
     Motor
     Other

    content_src_url

    Hot Item
    New List Item
    For 99-04 Ford F-250 F-350 Super Duty 8Pcs Front Wheel Bearning Hub Tie Rod End

    1.Fitting the Following vehicle:

    2000-2002 Ford Excursion
    1999-2004 Ford F-250 Super Duty
    1999-2004 Ford F-350 Super Duty

     

    2.Package Includes:

    2x Front Wheel Hub Bearing -515020
    1x Front Outer Tie Rod End - At Pitman Arm -ES3427T
    1x Front Outer Tie Rod End - Driver Side -ES3423
    1x Front Inner Tie Rod End - At Right Hand Connecting Tie Rod -DS1438
    1x Tie Rod Adjusting Sleeve - Passenger Side At Pitman Arm - 2nd Design -ES3426S
    1x Front Outer Connecting Tie Rod End - Passenger Side -DS1439
    1x Tie Rod Adjusting Sleeve - Driver Side -ES3422S

     

    Notes

      (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
      (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.

      (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page.

     

    If you are interested with any other suspension parts, please click and save our store.

     

    Tie-Rod End Replacement Guideline:

      If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.
      This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.

    Picture(A)
    Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance.
    1.Lift the vehicle and dismount the front axle wheels.
    2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes.

     

    Picture(B)
    3.Dismount the front underride guard.

     

    Picture(C)
    4.Loosen the fastening nut from the tie rod and remove it completely.
    5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator.

     

    Picture(D)
    6.Remove the clamp of the bellow on the steering gear.
    7.Push the bellow towards the tie rod end.

     

    Picture(E)
    8.Unscrew the inner tie rod from the rack.
    9.Clean the sealing face of the bellow at the steering gear.

     

    Picture(F)
    10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle.
    Note:Always use new self-locking nuts and bolts for a reliable repair.
    11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer.

     

    Picture(G)
    12.Mount the bellow and close the clamps with the appropriate special tool.
    Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance.

     

    Picture(H)
    13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer.
    Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure.
    Tip:Secure the ball stud against twisting with a suitable tool.

     

    Picture(I)
    14.Mount the front underride guard.
    15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer.

    16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications.
    17.Perform a test drive.
    Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission.



    • WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Copyright of autoutdoor. All rights reserved.