|
|
|
|
|
|
|
|
|
|
*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Audi Q7
Q7 Base Sport Utility 4-Door 3.0L 2011 2013-2014
Q7 Base Sport Utility 4-Door 3.6L 2007-2010
Q7 Base Sport Utility 4-Door 4.1L 2011
Q7 Base Sport Utility 4-Door 4.2L 2007
Q7 Elite Sport Utility 4-Door 3.0L 2011-2014
Q7 Elite Sport Utility 4-Door 3.6L 2010
Q7 Elite Sport Utility 4-Door 4.1L 2011-2014
Q7 Elite Sport Utility 4-Door 4.2L 2007-2010
Q7 Luxury Sport Utility 4-Door 3.6L 2007 2010
Q7 Luxury Sport Utility 4-Door 4.2L 2008-2010
Q7 Premium Plus Sport Utility 4-Door 3.0L 2011-2014
Q7 Premium Sport Utility 4-Door 3.0L 2011-2014
Q7 Premium Sport Utility 4-Door 3.6L 2007-2010
Q7 Premium Sport Utility 4-Door 4.2L 2007-2010
Q7 Prestige Sport Utility 4-Door 3.0L 2011-2014
Q7 Prestige Sport Utility 4-Door 4.2L 2010
Q7 S Line Sport Utility 4-Door 3.0L 2011-2014
Q7 S Line Sport Utility 4-Door 4.1L 2011-2014
Q7 Sport Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Elite Sport Utility 4-Door 3.0L 2008-2010
Q7 TDI Luxury Sport Utility 4-Door 3.0L 2008-2010
Q7 TDI Premium Plus Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Premium Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Prestige Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Sport Utility 4-Door 3.0L 2009-2011 2014
*Generation & Evolution:
Audi Q7
First generation (Typ 4L: 2007-2015)
Second generation (Typ 4M; 2015-present)
*Platform Drive Layout:
Front Engine-Four Wheel Drive Layout
Air Suspension Structure:
*Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set the steering to straight ahead.
2.Raise the vehicle.
3.Remove protective shroud on the right side to access the compressor.(picture a)
4.Remove the two(2)cable ties holding the connector wires.(picture b)
5.Disconnect the three(3)electrical connectors to the compressor.(picture c)
6.Remove the compressor air line(runs between the compressor and dryer). Remove the air line fitting from the air hose and discard.(picture d)
7.Disconnect the lines from the air valve block(black line(p)does not have to be disconnected).(picture e)
Note:Your compressor may not have a brown line as shown in picture e. If the brown line is not present, just disconnect the other(4)lines indicated and proceed to the next step.
8.Remove the three(3)mounting bolts that secure the compressor to the vehicle.(picture f)
9.Disconnect the brown line(located on backside of compressor). Compressor can be removed from the vehicle.(picture g)
Note:If a brown line is not present on your compressor then this step can be omitted.
10.Disconnect the line from the compressor dryer(identified as “p” On the air valve block)(does not need to be disconnected at air valve block).(picture h)
11.Remove the 2 nuts from the backside of the mounting bracket, remove bracket.(picture i)
12.Remove the thermal sensor wire harness by disconnecting the connector, loosening the sensor screw and removing the sensor.(this will be re-installed in the new compressor).(picture j)
13.Remove the three(3)mounting isolators from the compressor(these will be re-used on the new compressor. If the isolators are damaged it is recommended that they be replaced(contact your dealer for replacements).(picture k)
14.Removal complete.
*Installation Guideline:
Installation is in reverse order of air suspension compressor pump removal.
*Warning & Notice:
1.When the air compressor being replaced, the matching relay must be replaced according to the corresponding vehicle. If there is something wrong with the relay which leads the compressor to continuous operation without any break, it will burn out the electric motor or other plastic part.
2.When the air compressor being installed, the critical parts such as rubber shock pad and damping spring must be fully fixed on the stand without short installation or missing installation (The air compressor is unequipped with parts). With the anti-vibration parts of short installation or missing installation, a loud noisy instance will happen when the air compressor is working for the sake of resonance.
3.Distribution valve, shock absorber, air tank and tube connector must be checked after air compressor installed to ensure air-tightness. The lifespan of the air compressor will be shortened if the leakage exists.
4.Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case.
5.A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
6.Change the relays before installing the compressor even if it seems to still work. This is also a specification by the car manufacturer. Be sure to change the right relays. Relays look similar, that is why there is a risk to change the wrong relays.
7.Be sure to check whether the system is leakproof after repairing. The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature. Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
*OEM Part Number:
Air Suspension Compressor:
4J4100C,4L0698007A,
4L0698007B,4L0698007C
Valve Block:
7P0698014
4L0698007A
4L0698007B
4L0698007C
7L0698835A
7L8616006A
7L8616006C
7L8616007A
7L8616007C
7L8616007E
7L8616007F
*Package Includes:
Air Suspension Compressor +Solenoid Valve Block
*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Audi Q7
Q7 Base Sport Utility 4-Door 3.0L 2011 2013-2014
Q7 Base Sport Utility 4-Door 3.6L 2007-2010
Q7 Base Sport Utility 4-Door 4.1L 2011
Q7 Base Sport Utility 4-Door 4.2L 2007
Q7 Elite Sport Utility 4-Door 3.0L 2011-2014
Q7 Elite Sport Utility 4-Door 3.6L 2010
Q7 Elite Sport Utility 4-Door 4.1L 2011-2014
Q7 Elite Sport Utility 4-Door 4.2L 2007-2010
Q7 Luxury Sport Utility 4-Door 3.6L 2007 2010
Q7 Luxury Sport Utility 4-Door 4.2L 2008-2010
Q7 Premium Plus Sport Utility 4-Door 3.0L 2011-2014
Q7 Premium Sport Utility 4-Door 3.0L 2011-2014
Q7 Premium Sport Utility 4-Door 3.6L 2007-2010
Q7 Premium Sport Utility 4-Door 4.2L 2007-2010
Q7 Prestige Sport Utility 4-Door 3.0L 2011-2014
Q7 Prestige Sport Utility 4-Door 4.2L 2010
Q7 S Line Sport Utility 4-Door 3.0L 2011-2014
Q7 S Line Sport Utility 4-Door 4.1L 2011-2014
Q7 Sport Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Elite Sport Utility 4-Door 3.0L 2008-2010
Q7 TDI Luxury Sport Utility 4-Door 3.0L 2008-2010
Q7 TDI Premium Plus Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Premium Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Prestige Sport Utility 4-Door 3.0L 2011-2014
Q7 TDI Sport Utility 4-Door 3.0L 2009-2011 2014
*Generation & Evolution:
Audi Q7
First generation (Typ 4L: 2007-2015)
Second generation (Typ 4M; 2015-present)
*Platform Drive Layout:
Front Engine-Four Wheel Drive Layout
Air Suspension Structure:
*Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set the steering to straight ahead.
2.Raise the vehicle.
3.Remove protective shroud on the right side to access the compressor.(picture a)
4.Remove the two(2)cable ties holding the connector wires.(picture b)
5.Disconnect the three(3)electrical connectors to the compressor.(picture c)
6.Remove the compressor air line(runs between the compressor and dryer). Remove the air line fitting from the air hose and discard.(picture d)
7.Disconnect the lines from the air valve block(black line(p)does not have to be disconnected).(picture e)
Note:Your compressor may not have a brown line as shown in picture e. If the brown line is not present, just disconnect the other(4)lines indicated and proceed to the next step.
8.Remove the three(3)mounting bolts that secure the compressor to the vehicle.(picture f)
9.Disconnect the brown line(located on backside of compressor). Compressor can be removed from the vehicle.(picture g)
Note:If a brown line is not present on your compressor then this step can be omitted.
10.Disconnect the line from the compressor dryer(identified as “p” On the air valve block)(does not need to be disconnected at air valve block).(picture h)
11.Remove the 2 nuts from the backside of the mounting bracket, remove bracket.(picture i)
12.Remove the thermal sensor wire harness by disconnecting the connector, loosening the sensor screw and removing the sensor.(this will be re-installed in the new compressor).(picture j)
13.Remove the three(3)mounting isolators from the compressor(these will be re-used on the new compressor. If the isolators are damaged it is recommended that they be replaced(contact your dealer for replacements).(picture k)
14.Removal complete.
*Installation Guideline:
Installation is in reverse order of air suspension compressor pump removal.
*Warning & Notice:
1.When the air compressor being replaced, the matching relay must be replaced according to the corresponding vehicle. If there is something wrong with the relay which leads the compressor to continuous operation without any break, it will burn out the electric motor or other plastic part.
2.When the air compressor being installed, the critical parts such as rubber shock pad and damping spring must be fully fixed on the stand without short installation or missing installation (The air compressor is unequipped with parts). With the anti-vibration parts of short installation or missing installation, a loud noisy instance will happen when the air compressor is working for the sake of resonance.
3.Distribution valve, shock absorber, air tank and tube connector must be checked after air compressor installed to ensure air-tightness. The lifespan of the air compressor will be shortened if the leakage exists.
4.Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case.
5.A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
6.Change the relays before installing the compressor even if it seems to still work. This is also a specification by the car manufacturer. Be sure to change the right relays. Relays look similar, that is why there is a risk to change the wrong relays.
7.Be sure to check whether the system is leakproof after repairing. The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature. Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
*OEM Part Number:
Air Suspension Compressor:
4J4100C,4L0698007A,
4L0698007B,4L0698007C
Valve Block:
7P0698014
4L0698007A
4L0698007B
4L0698007C
7L0698835A
7L8616006A
7L8616006C
7L8616007A
7L8616007C
7L8616007E
7L8616007F
*Package Includes:
Air Suspension Compressor +Solenoid Valve Block
| Item Specifics | |
|---|---|
| Placement on Vehicle | Left |
| Included Hardware | Compressor |
| Lubrication Style | Oil-Free |
| Drive Layout | Front Engine 4WD |
| Platform | MLB |
| Material | Iron |
| Color | Silver |
| Type | Air Suspension Compressor |
| Custom Bundle | No |
| Return Policy | 30 Days Free Return |
| Manufacturer Warranty | 1 Year |
| Quantity | 2PCS |
| Brand | Unbranded |
| Manufacturer Warranty | 1 Year |
| Quantity | 2PCS |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]
1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc..
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 7 days as auction ended or order might be delayed.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]
Q: How do I pay for my purchase?
A: MY store accepts PayPal, VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Shop Category New List Item
Hot Item
Warranty
|
Air Suspension Compressor Pump + Valve Block 4L0698007A For Audi Q7 4L 2007-2015
*Compatibility Chart 2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits. 3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Audi Q7
*Generation & Evolution: Audi Q7
*Platform Drive Layout: Front Engine-Four Wheel Drive Layout
Air Suspension Structure:
*Removal Guideline:
*Installation Guideline: Installation is in reverse order of air suspension compressor pump removal.
*Warning & Notice: 1.When the air compressor being replaced, the matching relay must be replaced according to the corresponding vehicle. If there is something wrong with the relay which leads the compressor to continuous operation without any break, it will burn out the electric motor or other plastic part. 2.When the air compressor being installed, the critical parts such as rubber shock pad and damping spring must be fully fixed on the stand without short installation or missing installation (The air compressor is unequipped with parts). With the anti-vibration parts of short installation or missing installation, a loud noisy instance will happen when the air compressor is working for the sake of resonance. 3.Distribution valve, shock absorber, air tank and tube connector must be checked after air compressor installed to ensure air-tightness. The lifespan of the air compressor will be shortened if the leakage exists. 4.Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case. 5.A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these. 6.Change the relays before installing the compressor even if it seems to still work. This is also a specification by the car manufacturer. Be sure to change the right relays. Relays look similar, that is why there is a risk to change the wrong relays. 7.Be sure to check whether the system is leakproof after repairing. The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature. Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
*OEM Part Number: Air Suspension Compressor: 4J4100C,4L0698007A,
Valve Block: 7P0698014
*Package Includes: Air Suspension Compressor +Solenoid Valve Block
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. 1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order. Payment
1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc.. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 7 days as auction ended or order might be delayed. Returns
1.All of our brand new items come with a 60-Days money-back guarantee. Customer Services
Q: How do I pay for my purchase? Feedback
1. We will leave a feedback once we get your payment. Copyright of SCITOO-AutoParts . All rights reserved. |
