Holybro P900 Radio integrates microhard Pico Series P900 RF module which is capable of delivering high-performance wireless serial communications in robust and secure Mesh, Point to Point or Point to Multipoint topologies.
P900 Radio operate within the 902-928 MHz ISM frequency band, using frequency hopping spread spectrum (FHSS) technology, providing reliable wireless asynchronous data transfer between most equipment types which employ a serial interface.
P900 Radio may be configured as a Primary Coordinator, Secondary Coordinator, Standby Coordinator or Remote in a Mesh Topology, or a Master, Repeater or Remote in a PP or PMP Topology. This versatility is very convenient for the user.
P900 Radio is configured using AT commands through the Data port or using PicoConfig application through the Diagnostic Port.
Diagnostic Port
4-position JST SH. This connector connects to the Diagnostic Port. If you use PicoConfig application or special diagnostic commands to config the Radio, you should connect to this port. Diagnostic Port is 3.3V logic level compatibility. A USB to Serial board is needed for connecting the radio to your computer.
1x Microhard P900 Radio
1x Antenna
1x XT30 Power cable
1x GH 6P to 6P cable
1x Metal Pin
2x Microhard P900 Radio
2x Antenna
2x XT30 Power cable
1x GH 6P to 6P cable
1x Metal Pin