IMPORTANT NOTES about pre-order item

It is estimated to be shipped out on November 30, 2022

SmallRig Retro Cage for FUJIFILM X-T5 3870 is designed to protect the camera and provide accessory mounting points. The cage is endowed with a new punk style featuring a shutter button adapter frame and an ergonomic leather grip for improved shutter control and grip experience. It locks the camera via one 1/4"-20 screw at the bottom and two side lock adapters, with silicone pads preventing scratches. You will have full access to camera buttons, card slots, flip screen, and battery door. It's accessory mounting points include: 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole for attaching Side Handle HSN2093, Top Handle 2165, Monitor Mount 2903, Holder for Portable Power Banks 2336, quick release plate (height increase pad) for RS 3 / RS 3 Pro gimbals; NATO rail for NATO Side Handle 3847; cold shoe mount that supports microphone, LED video light; as well as wrist strap hole for Hand Strap 3848, Shoulder Strap PSC2428. Besides, an Arca-Swiss quick-release plate at the bottom allows direct mounting onto Arca-Swiss tripods. Other attractions of this item are a built-in screwdriver for easy disassembly and assembly and a hot shoe cover with a bubble level for calibration.

Note:

1. 1.Please remove the split D-ring before installing the cage.
2. 2.The case and wrist strap generally have varying colors, for they are made of leather.

Designer: Nico Robin

1. Compatibility       

FUJIFILM X-T5

1. In the Box:

1 x Cage

1 x Hot Shoe Cover

1 x Side Lock Adapter

1 x Shutter Button Adapter

2 x M2 Screw

1 x Tapered Screw

1. Specifications

Product Dimensions: 145.8 x 63.25 x 103.4mm

Package Dimensions: 130 x 175 x 75mm

Product Weight: 235g ± 5g

Package Weight: 370g ± 5g

Material(s): Aluminum Alloy, Silicone, Leather, Stainless Steel

SmallRig Multifunctional Cage for FUJIFILM X-T5 4135 is designed to protect the camera and provide accessory mounting points. It secures the camera via one 1/4"-20 screw at the bottom and one M2 screw on both sides, with rubber pads preventing scratches, and gives full access to buttons, card slots, screen, and battery door. Apart from a built-in grip for enhanced grip experience, the cage also has various accessory mounts. They include (among others) 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI 3/8"-16 locating holes that support Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto-type Quick Release Plate 1280 & 2458, Power Bank Holder 2336 and mini V-Mount Battery Plate 2987; and two 1/4"-20 locating holes on one side for Single Rod Clamp 3598, Magic Arm 3873. On its top and left side there are NATO rails to quickly connect NATO Top Handle 3766, Monitor Mount 2906B, or Rotating NATO Side Handle 3847. Besides, the cage comes with cold shoe mounts to install a microphone, LED video light, etc.; a QD port for a quick-release QD shoulder buckle; and an Arca-Swiss quick-release plate at the bottom for Arca-Swiss tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbal for quick switch between gimbal, handheld and tripod modes. A screwdriver is also included for easy assembly and disassembly. A complimentary shutter button helps improve touch.

Note:

1. Please remove the split D-ring before installing this cage

Designer: Clara Oswald

1. Compatibility

FUJIFILM X-T5

1. In the Box:

1 x Cage

1 x Shutter Button

1. Specifications

Product Dimensions: 145 x 58.7 x 105.6mm

Package Dimensions: 162 x 121 x 71mm                 

Product Weight: 158g±5g

Package Weight: 229.5g±5g

Material(s): Aluminum Alloy

SmallRig HDMI & USB-C Cable Clamp for FUJIFILM X-T5 4147 is designed to prevent accidental cable disconnection for stable signal transmission. It is attached to the left of Cage 3870 or Cage 4135 via two M3 screws. With a new press-and-flip design, the cable clamp gives easy access to camera interface cover while fixes HDMI & USB-C cables to protect ports.

Designer: Nico Robin, Quinn

Compatibility      

Cage 3870

Cage 4135

1. In the Box:

1 x HDMI & USB-C Cable Clamp

2 x M3 Screw

1. Specifications

Product Dimensions: 42.3 x 29.7 x 23mm

Package Dimensions: 47.3 x 34.7 x 28mm               

Product Weight: 32g ± 5g

Package Weight: 57g±5g

Material(s): Aluminum Alloy

*Please note the import tax may occur.