The adapter is tested with following ID003 bill acceptors: UBA, taiko and WBA 12/13. The adapter should however work with any id003 bill acceptor. If you allready have a WBA 12/13 acceptor in your machine you can upgrade the firmware on the bill acceptor to newest ID003 bill set and get updated bill support without changing bill acceptor. This would require to change the firmware eprom in the WBA.
The device wires in line with the the s+ bill acceptor power supply and the acceptor. The conectors are screw terminals that can easily be plugged in and out from the board.
I have added support for ''free play'' switches, for those who want to add credits with a push button. Any push button like the service switch or a key switch could be used to add credits to play for free at home.
*Note: free play switches are not opto isolated.
*Note: Miswiring may damadge interface board.
*Note: you need a software in your S+ / PE+ machine that support ID023 protocol. In older documentation this is sometimes refered to as "version 2.4" or "version 2.5".
*Note The older ID022 is not supported by this board.
*Note: Bill acceptor not included.
*Note: Slot machine game / SET eprom chip not included.
*Note: Country code on ID023 is set to 37.
*Note: The adapter is intended for personal, non comersial use.
*Note: No returns.
*Note: The adapter is intended for personal, non comersial use.
*Note: No returns.
Feedback from buyers:
"The adapter arrived earlier than expected. This adapter works great easy setup along with the video and instructions. Also, it works just like the Youtube video"
FAQ:
How do I know if my PE+ supports ID023 protocol?
Go into the menu by pressing the white test button. If you find a option that says "Country code: xx", it is most likely ID023. The reason you can assume this is that the older ID022 did not use country code.
So what if I don't find the option that say "country code: xx" on my PE+ ?
Your machine most likely does not support ID023 protocol. You can not use the interface board "out of the box". You would need to change software eproms on your machine to be able to use the interface board.
How do I know if my S+ supports ID023 protocol? (Methode 2 is prefered)
Methode 1) Go into the menu by pressing the white test button. Press a couple of times until you see Selection <0> [5], then use the reset switch to navigate forward in the sub menu. If you find the <0> [20], that is the option for country code and you most likely have support for ID023.
Go into the menu by pressing the white test button. If you find a option that says "Country code: xx", it is most likely ID023. The reason you can assume this is that the older ID022 did not use country code.
So what if I don't find the option that say "country code: xx" on my PE+ ?
Your machine most likely does not support ID023 protocol. You can not use the interface board "out of the box". You would need to change software eproms on your machine to be able to use the interface board.
How do I know if my S+ supports ID023 protocol? (Methode 2 is prefered)
Methode 1) Go into the menu by pressing the white test button. Press a couple of times until you see Selection <0> [5], then use the reset switch to navigate forward in the sub menu. If you find the <0> [20], that is the option for country code and you most likely have support for ID023.
*NOTE 1: If option 17 (bill acceptor enable) is set to 0, option 20 will not show.
*NOTE 2: some SP chips, like SP1271, uses <0> [9] for Bill Acceptor Display. It looks like country code is displayed under <0> [30].
Methode 2) If you are a newlifegames member, you can download spreadsheet https://newlifegames.com/nlg/index.php?topic=33460.0. Look up your SP chip number in the list. If it supports bill validator protocol "ID023", "Version 2.4" or "Version 2.5" it is most likely ID023 support.
So what if I don't have ID023 support on my S+?
You can not use the interface board "out of the box". You would need to change software eprom on your machine to be able to use the interface board.
Do I need anything else to use set up the machine to work with the adapter?
You might need a SET chip to activate the bill acceptor, set the country code and set the denomination.
Not sure how to set up and use the adapter?
This video demonstrates setup and use.
IGT S+ / PE+ bill acceptor adapter ID003 to ID023. New bills support!
Video will open in a new window
Using the eBay App? Paste link into a browser window: