Solder Tools 40W Electric Soldering Iron Gun Tool Kit Welding Desoldering Pump Tools Set 110V

INTBUYING®

With the development of science and technology, electronic technology penetrates into various industrial sectors and in all areas of life.As a electric enthusiast,it's an essential basic skill to install and weld of electronic products.In the electronic engineering practice, by assembling and debugging an electronic product,can improve the way of thinking, especially in ability.

Electric Soldering Iron

 

Electric soldering iron uses the advanced optimization design and meticulously product.The handle is made of new high-strength and heat-resistant material,and it's also with high-quality and durable heating element.The iron has the festure of safe, beautiful look and lightweight.So it becomes more and more popular.

Specifications:

Name  Electric Soldering Iron
Power  40w
Voltage  110V
Length  23cm (9")

Note:
The first time using the new electric iron, is powered by hot child may appear , it's normal to have slight smoke which is because of electric heating element electrified ,and it will disappear later.
Electric iron should be kept dry, and never using after wet or rained.
Please check the voltage before using it.

 

Soldering Smoke Absorber

Mount the CXG493 Soldering Smoke Absorber on this optional Arm Stand,and you have a powerful smoke absorber that can freely adjusted for maximum ease of using and optimum smoke absorption.Once the job is done,the unit can be quickly and easily swung to one side,where it will be out of the way but ready in an instant when needed for the next job.

CGX493 is a newly developed product which is a high performance fan and an activated carbon filter designed to absorb flux and lead fumes.

Specifications:

Name  CGX493 Soldering Smoke Absorber
Power Consumption  16W(50Hz)/14W(60Hz)
Outer Dimensions  220*270*168mm(8.7"*10.6"*6.6")
Weight  1500g (3.3lbs)
Operation Instruction:
Open the Filter Guider,and install the Activated Carbon Filter.Then close the Filter Guide.
Loose the Knob and adjust the angle.

Replace the Filter
Under normal operating conditions,the filter should be replaced once a month since absorption capacity decline.
The filter may also need replacement when the dust adhere.(Never allow the filter to become wet.)

Activated-Carbon Filter Specifications:

Size 130*130*10mm(5.1"*5.1"*0.4")
Amount of Activated-Carbon Filter 7g (0.02lb)
Max.absorbing weight of noxious components per filer 2g (0.004lb)

Hot Glue Gun and Glue Stick

The hot glue gun uses high-technology ceramic PTC thermistor as heating originals.The PTC thermistor can be in constant temperature automatically.The temperature will not raise when the temperature raises to the designed one of the glue stick ,this can prevent the hot glue gun from the damage of heating element,and extending the service life.

Features:
1、The product can be applied to the glue stick which is 10mm(0.4")diameter.
2、The glue stick is inserted into the end of glue gun until is inside. Plugging in and preheating 5-8 minutes.Pulling the trigger to extruded sol, and can control the volume.
3、During the using,it's not necessary to remove the glue stickif you can't use up it.Next time,it can be used directly after preheating 5-8 minutes.

Specifications:

Name

 Hot Glue Gun

Power

 40w

Length

 130mm (5")

Digital Multimeter and Digital Electrical Tester Pen

DT9205A digital multimeter is easy to operate, accurately reading, full-featured,easy to carry.

Specifications:
 
Name  DT9205A Digital Multimeter
DC Voltage  200mV-1000V ±(0.5%+1)
AC Voltage  200mV-750V ±(0.8%+3)
DC Current  20mA-20A ±(0.8%+1)
AC Current  20mA-20A ±(1%+3)
Resistance  200Ω-2000MΩ ±(2.5%+3)
Capacitance  2nF-200μF

Digital electrical tester pen is a kind of tester pen, which belongs to electrical and electronic tools,and is used to test whether charged in the electric wire.This tester pen body is with LED display,you can read the tested voltage directly.

Specifications:

Name  Digital Electrical Tester Pen
Voltage  12-250V(AC\DC)

Anti-static Tweezers and Solder Sucker

ESD-10(Standard): using to weld circuit boards and installing or replacing parts
ESD-11:Longer than ESD-10,appling to precision electronic parts operation.
ESD-12(high elasticity):The tweezers tip is stronger than standard's.It won't bend during clipping board with strong force and the parts won't fall.
ESD-13 (round):Avoiding to damage components and appling to take out chip.
ESD-14(fine):The tweezers tip is extra-fine and sharp,appling to high-density integrated circuit chip operation.
ESD-15:The tweezers tip is curved,appling to take out components in narrow place. 

Solder Sucker is made of aluminum.It is easy to carry and operate.

Component Package

Diode Package

8 kinds, total 100 pcs

 1N4148 25pcs

 1N4007 25pcs

 1N5819 10pcs

 1N5399 10pcs

 FR107 10pcs

 FR207 10pcs

 1N5822 5pcs

 1N5408 5pcs

 

Ceramic Capacitor Package

24 kinds, 10pcs in each kind
6P 10P 18P
20P 22P 25P
30P 33P 47P
68P 101P 221P
331P 471P 681P
102P 222P 332P
472P 103P 223P
333P 473P 104P

Resistor Package

25 kinds, 20 pcs in each kind
10 47 100
200 330 470
680 1K 1.5K
2K 3.3K 4.7K
6.8K 10K 15K
20K 33K 47K
68K 100K 150K
330K 470K 1M 2M

Adjustable Resistor Package

9kinds, 5 pcs in each kind
100(101) 500(501) 1K(102)
5K(502) 10K(103) 50K(503)
100K(104) 500K(504) 1M(105)

Electrolytic Capacitor Package

12 kinds, 10 pcs in each kind
0.1UF/50V 1UF/50V 3.3UF/50V
4.7UF/50V 10UF/25V 22UF/25V
33UF/25V 47UF/25V 100UF/25V
220UF/25V 330UF/25V 470UF/25V

XTL Package

10 kinds, 3 pcs in each kind
6MHZ 8MHZ 11.0592MHZ
12MHZ 16MHZ 22.1184MHZ
20MHZ 24MHZ 32.768KHZ
48MHZ    

Audion Package

11 kinds, 10 pcs in each kind
S9012 S9013 S9014
S9015 S9018 2N3904
2N3906 2N5551 2N5401
S8050 S8550  

Universal Circuit Board

Universal Circuit Board are accordance with standard IC spacing (2.54MM,0.1") and full with bonding pads.We offer different sizes of circuit boards,enthusiast can instrument components on their own wishes.
specifications:
1、There is two bonding pads on both sides,and it can be welded components on both sides.
2、The thickness of the circuit boards is 1.6mm(0.06"),and is in good material.
3、Single hole, the distance between two holes is 2.54mm(0.1"), and the diameter is 0.95mm(0.04") .
4、The bonding pad which both sides of one hole is connected

Shipping & Handling Details

Default  Shipping Cost or Free Shipping Information: 

 Default  shipping cost or free shipping service is only for the customers  from Canada or the lower 48 United States by Canada Post, USPS or  the UPS Ground. Customers from other areas or needs other shipping  ways, please contact us.
 Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,  Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there  WILL be extra shipping costs, please contact us for more detailed  information.
▲ 
Please  make sure your address is valid for both UPS and USPS services. Any  costs incurred because of incorrect or undeliverable address should  be undertaken by buyer.

Handling Time: Shipping  is usually made in 1-3 business days after payments cleared. Orders  are processed from Monday-Friday; Not on the weekends & public  holidays.

Sales tax / Customs  duties: Any  sales taxes or Customs duties are not included. If came out, they  must be undertaken by the buyer.

Damage In Shipping: Email  or call us First! We will work with you to get the case resolved in  the fastest method.

Return /  Refund

If you are not 100% happy with your purchase, please  contact Us. Please don't directly opened a request or case without  informing us, or else, we will do some discounts on the warranty and  other sales-services later on. Hope for your understanding.

Returns & Exchanges

 All  returns must be made within 14 days of delivery date. Items must be  in new, unused condition, with all original materials included with  the shipment. A partial refund may be applied for opened or damaged  items, depending on the condition.
▲ Items  returned under the buyer’s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be  deducted from the refund. 15% restocking fee of the items purchase  price will be charged. 
 Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges

▲ 
All  returns require a RA (Return Authorization) number that will be  given by our seller. Please contact with us at first for more  details.

Defective & Damaged Products 

▲ If  product was received damaged or not as described, please send us  some pictures or videos, so we could well understand your problem,  then solve them for you ASAP. Besides, it's much helpful for us to  claim with UPS, remind our related department to pay much more  attention to packaging later on. Hope for your understanding.
 Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price  will be refunded back to your original payment method. 
▲ If  an item is received damaged, customer service must be contacted  within 7 days of receiving your item. All returns require a RA  (Return Authorization) number as above.

Payment

eCheck Issues: Payments via  eCheck do not clear immediately. Usually you will wait 5-7 days  after checkout for it to clear. Then we will arrange shipments  for you.

Warranty & Feedback

 6  months' warranty for the machines, not for the consumables. We stand  behind our products all the item, so even if your warranty period  has expired, you can still seek for service or technical support  from us with low cost.
▲ Any  warranty shipping cost to us is responsible by buyer.
 Any  shipping cost to buyer is responsible by the seller. 
▲ 
We  committee to the customer satisfaction and want to bring you the  best purchase experience. If there is any problems, please contact  us ASAP. If not, please leave us a positive feedback as it's very  important for us. Thanks very much.


On Nov 29, 2022 at 21:52:23 PST, seller added the following information:

DataCaciques