Note: SSDs are not included !!!!! you can only use one type SSD card at one time, the simultaneous use of two type SSDs is not supported, NVME M2 is not supported.
Product Interface:SATA 22PIN male
PCB color:Black PCB
Product speed:20Gbps/10Gbps
Support protocol: MSATA or M2 NGFF SATA, can not be used at the same time
Main control chip: switch with switch
System support: WIN7/WIN8/WIN1 0/WIN1 1/MAC/L.INUX
Product Features.
The motherboard KEY-B-M SATA definition or MSATA hard drive adapter to SATA 22PIN interface, this adapter board will only connect the signal from the M.2 hard drive to the SATA 22PIN connector, so the adapter card does not require a driver. If you can't recognize the hard drive, please check if your hard drive interface is M.2 interface or MSATA interface, the adapter card basically will not be faulty, please know.
SSD, does not support the new NVME M2 SSD, does not support PCI-E M2 SSD, MSATA and M2 can not be used at the same time, to switch between MSATA and M2 disk through the switch.
Product Description.
1: This card is suitable for 4 different SSD drive lengths, suitable for different M2 (NGFF) SSD drive lengths such as 2230 2242 2260 2280 and full height MSATA drives. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance point! Products are tested before shipping.
2. The adapter card only changes the interface form of the SSD, and does not change any performance of your hard drive, what your original hard drive parameters, with the adapter card, the output interface performance will not change.
3. Hardware requirements.
A motherboard, a laptop or an adapter card with SATA interface
M2 KEY B-M SSD or MSATA