If
you play electronic drums and you have a feeling that you need an
additional or a different drum sound from a different drum module, you
need to see this:
The Fabesis EDM-1 is the unique Electronic Drum Trigger Switcher and
Mixer with the ability to run a single trigger to 2 drum modules. It can
switch and mix the electronic drum trigger signals such as the tip and
rim from a single trigger to 2 drum modules, now you can play and mix
drum sounds from 2 Drum modules with flexibility without the need to go
deep into MIDI. MIDI Programming is Complex and time-consuming, so
Let's go on an easier way!
With this Device you can play your favorite Head or Rim sound separately
from the Drum module of your choice.
For example: You can play the Snare Head from Drum Module 1, and pick up
that nice Rim sound effect from Module 2 or vice versa using a single
trigger pad. In addition, This device has the ability to Mix the
signals going out to both Drum modules simultaneously. Now you have the
flexibility to play, mix and record newer, richer, full-bodied drum
sounds.
Using the Fabesis EDM-1 is easy:
First,
connect a mono or stereo cable from the trigger into the Fabesis
EDM-1 Trigger input. Next, Connect 2 mono or stereo cables from the
Fabesis EDM-1 trigger output into the desired Trigger input on the Drum
Modules.
Now,
let’s look at the Fabesis EDM-1 top: On the Fabesis EDM-1 Output area
you can select either head 1 or head 2, Rim 1 or Rim 2. If you wish to
Mix the head or RIM signals simply use the Head ON/OFF switch on the
MIX area on the Fabesis EDM-1. It’s That Simple !
For your convenience, the Fabesis EDM-1 has a built-in bracket to mount on a trigger tension rod.
Tested with Alesis Strike, DM10, Crimson, Command, Nitro, Turbo, Roland TD-12, TD-20, Yamaha DTX900*.
Specifications
- Drum Trigger Input.
- Drum Trigger Outputs x2.
- Head Route to Drum Module .
- Rim Route to Drum Module.
- Head Mix.
- Rim Mix.
- It works with Mono and Stereo Cables.
- Plug and Play - No Power Required.
- Dimensions: 117.5 x 50 x 62 mm.
- Material: Anodized Aluminum/Galvanized Steel.
- Weight: 8.68 ounces
Please note that: To play both head and rim a stereo cable is required. If a Mono cable is used only the head will be triggered.
*Yamaha works on head only.
Contact me with any questions.