eBay

AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester is a great upgrade, which adapts the latest GDI design. It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche. It comes with multi voltages available for GDI injectors, which enables to adapt for different types of injector testing. The machine is the necessary and preferred equipment for the automotive serving and maintenance, research, and teaching training departments.Our product supports 99% of injector cleaning and testing. However, for diesel injectors, it only supports cleaning but not testing.


For GDI Injector Cleaning&Test: AUTOOL CT400 can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.	Multi Voltage Selection: AUTOOL CT400 GDI Fuel Injector 6-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing.	Ultrasonic cleaning function It works by accurately transmitting ultrasonic vibration signals to the injectors via a pulse signal cable. These high-frequency vibrations trigger strong resonance of the carbon inside the injectors, resulting in a deeper and more thorough cleaning.

Various Parts equipped&Portable Drawer : It is equipped with a diverse range of injector accessories designed to meet a variety of different needs. The bottom of the body is cleverly designed with a portable drawer for storing various parts and easy access for efficient management.	6-Cylinder & 2 Draining Ports Design: AUTOOL CT400 can test and clean six injectors simultaneously to greatly improve efficiency; it also has special control valves for cleaning solution discharge and test fluid recovery. Simple and easy to understand operation for efficient processing.	Smart Control Panel Provides function options, eye-catching display of working figures, flexible GDI pressure adjustment options, convenient timing configuration settings, and a push-button operation panel that combines multiple controls in one.

AUTOOL CT160 Car Fuel Injector Tester Heating Cleaner is a professional 4 cylinders auto fuel injector testing cleaning machine. It will help us clean and test the injectors of gasoline cars and motorcycles. Support for more cars and motorcycles. Can only be used to clean diesel fuel injectors,not for testing diesel fuel injectors. Its working voltage range is 110-230V and English control panel.


FUEL INJECTORTEST - IDLE SPEED TEST - LEAKAGE TEST - MEDIUM SPEED TEST - IDLE SPRAY VOLUME - HIGH SPEED TEST - MEDIUM SPRAY VOLUME - ACCELERATING TEST - HIGH SPRAY VOLUME - VARIABLE SPEED TEST	HEATINGTHE CLEANING FLUID CT160 is able to heat the cleaning fluid in the cleaning tank, which can improve the cleaning effect on injectors.	ULTRASONIC CLEANING It can perform ultrasonic cleaning on single or multiple injectors simultaneously, which can eliminate thoroughly blockages on the injector accessories and internal.


WIDE RANGE OF APPLIGATIONS Supports most of the cars and motorcycles among the market.	RECOVERY CLEANING FLUID Used cleaning fluid and testing fluid can be easily recovered,	DISTINCTIVE SHAPE DESIGN Compact, Lightweight, Portable, Net only weighs 8kg; large capacity Ultrasonic cleaning tank of 2000ml, all cleaned at once.

AUTOOL CT150 Car Fuel Injector Tester Cleaner is a professional 4 cylinders auto fuel injector testing cleaning machine. It will help us clean and test the injectors of gasoline cars and motorcycles. Its working voltage range is 110-230V. Our product supports 99% of injector cleaning and testing. However, for diesel injectors, it only supports cleaning but not testing.


Full inspection of injectors Uniformity test: To test the uniformity of injecting amount of each injector. Sprayability test: To monitor the spraying status of each injector with the help of backlight. Leakage test: To test the sealing and dribbling conditions of injectors under high pressure. Injecting flow test: To check the injecting amount of the injector of specific injection condition(eg. same time and number of times).	Ultrasonic Cleaning Built-in ultrasound mechanism. Different from the traditional method, it works by sending an ultrasonic vibration signal to the fuel injector through a pulse signal line, so that the stubborn carbon deposits are strongly shaken and removed more thoroughly.	Multi-Progress AUTOOL CT150 can be used for cleaning and testing four injectors at the same time. With 4 Cylinders(4 tubes). It can clean and test four injectors as same time. If 2-cylinder engine, when use the Autool CT150 to clean and test 2 injector (there are 2 connectors in machine should be stoppered).

Reverse Cleaning & On-Vehicle Cleaning On-vehicle cleaning: The unit is equipped with various adapters and couplers that facilitate cleaning on the injectors on vehicle. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector strainer (Only for the top fuel supply injector).	Cleaning fluid recovery valve After the cleaning is completed, the cleaning fluid needs to be recovered through the valve, which has the advantage of: 1. Damage will be caused to the product of the liquid is left inside the cleaning bath for a long time. 2. The recovered liquid can be reused, thus saving your cost.	New upgrade panel This is the latest version with a waterproof feature, so you don't need to worry about the control panel surface getting wet

AUTOOL CT60 is a specialised injector cleaning and testing tool. It can easily drive both normal and direct injection injectors and is compatible with most models on the market, including BMW, Mercedes-Benz, Porsche, etc. The AUTOOL CT60 currently supports a maximum of 120V to drive the injector voltage, which can satisfy a variety of different needs. In addition, the CT60 can also be used in conjunction with the CT160 injector cleaner to achieve better cleaning results. For garages, the AUTOOL CT60 is a must-have tool that can greatly improve work efficiency.


Support Injector Types The automobile naturally aspirated fuel injector, the DC voltage 12V can drive the electromagnetic valve in the fuel injector. The automobile turbocharged fuel injector can drive the electromagnetic valve in the fuel injector with an instant voltage of 70-120V.	Adjustable Operating Frequency & Time Range The operating frequency range can reach 600-4000 rpm, the operating time setting range can reach 0-99 mins. The pulse value and time value can be flexibly set according to the needs.	DIY cleaning tool kit Just hook the battery, put the leads of the tester in the injector, then setup the adapter, select the pulse frequency and operating time, making injector cleaning and testing so much easier.


LCD Display With a LCD display, the operating frequency and time are digitized for more accurate adjustment.	Perfect Match Fuel Injector Cleaner Tester CT6O's high-volt injector drive mode can be used with the fuel injector cleaning machine.	Fit for All Petrol and Diesel Car Car fuel injector cleaner tester is suitable for all petrol and diesel cars. It can also be used to enhance all injector pulse signals, configure multiple pulse outputs, and adjust speed, pulse width, running time and other parameters as needed.