I've had this computer for about 6 months, and I just recently moved to Mini-Itx due to space restrictions. The case is a mid-tower Deepcool RGB case, with a LED strip running down the front. It is L20.3 x W10.8 x H20.1 inches and supports 3x120mm or 3x140mm front fans, 2x120mm or 2x140mm top fans, 2x120mm side fans, and 1x120mm rear fan. You can mount a 360mm/420mm AIO to the front or a 240mm/280mm AIO to the top. I only had a 120mm AIO mounted to the rear and it kept my Ryzen 5 3600 at 40C on idle or 45C under load. The case also did a good job of keeping my 1080 Ti at 65C at idle and 75C during a stress test. I have included the ASRock B450M-A, 160GB HDD, the ThermalTake 120mm AIO, 6 Apevia RGB fans, 3 LED strips (the RGB controller only supports 2, but the third can be used as a spare), and a GPU stabilizer along with the case. It is ready for you to put in your own CPU, GPU, Power Supply, and Boot Drive. The case has been dusted and cleaned, and I have included the manuals for the AIO, along with its spare parts/cords, and the Apevia fans. I put paper over the hole for the PSU to house all of the spare parts.