Do you like holding party but is annoyed by winding wire? This wireless transmitter and the receivers will help you to get rid of the trouble.
Just plug the transmitter into stage lamp console, plug the receivers into stage lamp and you will be free to control stage lamp without wire.
Features:
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by
console) by wireless way.No time delay when signal data is transmitting, signal data is real time
and rel iably.This product adopts a 2.4G ISM frequency section.High effective GFSK
modulate,communication design; 126 channels jumping frequency automatical ly, high anti-
jamming abi l ity.
Receiver Product parameter:
1. 2.4G wireless DMX512 R/T
2. 126 channels jumping frequency automatical ly, high anti-jamming ability. to ensure works
rel iability
3. 7 groups ID code settable,User can use 7 groups individual wireless net without any interfere
4. each other in the same place...(Tricolor LED displaying Indicators)
5. Input voltage:5VDC 500mA MIN
6. Communication distance: 300M (visible distance)
7. Work frequency section: 2.4G ISM,126 channels.frequency section
8. Max transmitting power rate:20dBm
9. Net weight:180g
10. Warranty : 3years
Operating manual ID code and LED color corresponding relationship
1 RED
2 GREEN
3 RED+GREEN
4 BLUE
5 RED+BLUE
6 GREEN+BLUE
7 RED+GREEN+BLUE
1. Press momentary switch above the side led indicator to indicate ID setting
2. Press again to set IC Œto the color ID desired,adding 1 each time you press the
switch will advance the color ID code.
3. Working condition LED constant lit upNo DMX or wireless signal. Red LED flash：
Transmitting. Green LED flash receiving
4. RF frequency 2.400 - 2.525G Œtotal 126 channelsï Œit's searching automatically,
5. ID Code groups ID code，press 'KEY' for settingï Œit only can work under same
ID code of transmitter and receiver. (Same LED Color)
Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.
Package include:
DMX 512 Wireless Lighting Controller Transmitte+adapter (according to your choice)
DMX 512 Wireless Lighting Controller Receiver+adapter (according to your ch oice)
User manule
We have EU / US / UK / AU standard plug, we default to send in accordance with national standards and, if special needs, please leave a message.
