Integrated Controls USA
is a domestic manufacturer for the OEM and aftermarket industry. Contact us for
additional products and/or custom applications. Wholesale dealer inquiries
welcome.
Electric
Choke Thermostats are integral electric or electric assist style choke
thermostats that are internally heated. They are mounted on the carburetor and
control the opening and closing of the choke plate. This function allows for a
richer than normal fuel/air ratio during cold temperature start and warm-up.
Applications:
ELECTRIC CHOKE THERMOSTAT for 1982-1986 CHEVROLET C10 TRUCK, 1982-1986 CHEVROLET C20 TRUCK and 1983-1986 CHEVROLET C30 TRUCK with ROCHESTER QUADRAJET CARBURETORS for the following models/years/engines:
- 1982 CHEVROLET C10 TRUCK 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1983 CHEVROLET C10 TRUCK 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1984 CHEVROLET C10 TRUCK 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1985 CHEVROLET C10 TRUCK 4.3L, 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1986 CHEVROLET C10 TRUCK 4.3L, 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1982 CHEVROLET C20 TRUCK 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1983 CHEVROLET C20 TRUCK 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1984 CHEVROLET C20 TRUCK 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1985 CHEVROLET C20 TRUCK 4.3L, 5.0L and 5.7L ELECTRIC CHOKE THERMOSTAT
- 1986 CHEVROLET C20 TRUCK 4.3L, 5.0L, 5.7L and 7.4L ELECTRIC CHOKE THERMOSTAT
- 1983 CHEVROLET C30 TRUCK 5.7L ELECTRIC CHOKE THERMOSTAT
- 1984 CHEVROLET C30 TRUCK 5.7L ELECTRIC CHOKE THERMOSTAT
- 1985 CHEVROLET C30 TRUCK 5.7L and 7.4L ELECTRIC CHOKE THERMOSTAT
- 1986 CHEVROLET C30 TRUCK 5.7L and 7.4L ELECTRIC CHOKE THERMOSTAT
Includes SELF-TAPPING SCREWS (to replace those with existing rivets) and RETAINING TABS MOUNTING HARDWARE. We are the manufacturer of this product.
Features:
·
Exact original equipment replacement
·
Housing mate with original equipment connector
·
Automatic operation in all temperatures
·
Durable, over one million field tested
·
Dustproof and moisture resistant housing
· High performance, restoration, street/strip, marine, and custom configurations available
· Includes mounting hardware
Specifications:
·
Operating temperature: -40º to 130º C
·
Typical voltage: 7.2 to 15 vdc
·
Total resistance: 1.5 to 3.0 ohms @ 25º
·
Deflection rate up to 1.16 angular degrees per degree F
·
Torque rate up to .250 inch/ounces per angular degree
·
Operating life: over 1,000,000 cycles
About
Us:
Integrated
Controls USA has served the needs of the worldwide automotive market since
1990. Our commitment to state-of-the-art manufacturing techniques proudly
supplies OEM's, manufacturers, wholesale distributors and performance
specialists. We are committed to meet OEM standards and specifications to
ensure all Integrated Controls products have equal or better accuracy, longer
life and increased reliability.