The battery and DC power adapter have been configured with physically and electrically hermaphroditic Anderson Powerpole connectors and, therefore, are very easy to connect together.
Easy to use: Just connect the DC to DC power converter to the battery output port with the supplied connection cable.
Top and Side View
Bottom View
Safety Features
- Water-resistant, firm ABS plastic casing.
- Built-in PCB protection.
- Prevent short circuit, over-current, over-heat, over-charge, and over-discharge.
- The internal pack is stabilized by braces, thereby avoiding mechanical accidents caused by vibration.
Battery Specifications:Chemistry | |
Voltage | - Nominal Voltage: 36 V
- Minimum Voltage: 30V
- Maximum Voltage: 42V
|
Capacity | |
Size | - 260.00 x 148.00 x 56.00 mm
- ( or 10.2" x 6" X 2.2")
|
Weight | |
Operate Temp. Charge | |
Operate Temp. Discharge | |
Storage Temp. | |
PCB Safety Function | - Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
DC Power Converter:
It can directly connect to a 36V lithium ion battery or any battery with output voltage range between 28V to 45V. Its maximum output is 6 Amps
Features:
Wide input range: 28V ~ 45V
Large output: up to 6 Amps
High efficiency ( > 90%)
Small size: 78 x 36 x 24mm ( or 3.2" x 1.4" x 1")
Light weight: 180 g ( or 6.5 oz)
Technical Specifications:- Acceptable Input DC Voltage Range : 28V ~ 45V
- Output voltage: 19V
- Output current: Max. 6A*
- Efficiency: > 90%
- Safety Protections: Over Current & Over Voltage Protection
- Short Circuit Protection: Yes
- Small size: 78 x 36 x 24mm ( or 3.2" x 1.4" x 1")
- Light weight: 180 g ( or 6.5 oz)
*6A is its maximum output current, not actual output current. Actual output current depends on the device's requirements. For example, if your device requires 2 Amps, it will output 2 Amps.
The DC to DC power converter can convert DC power from the battery to 19V power output.