Size:
Each cutter is 11mm tall, the height of the cutter determines its size, see pictures for more details.
Art Deco Drop: 11×15mm, 15×20mm, 18×25mm, 22×30mm, 25×35mm & 29×40mm.
Bauble Drop: 9×15mm, 12×20mm, 15×25mm, 18×30mm, 21×35mm & 24×40mm.
Circle: diameters of 15mm, 20mm, 25mm, 30mm, 35mm, & 40mm.
Crescent Arch: 12×15mm, 16×20mm, 21×25mm, 25×30mm, 29×35mm & 33×40mm.
Crescent: 8×15mm, 10×20mm, 13×25mm, 16×30mm, 18×35mm & 21×40mm.
Crescent Moon: 10×15mm, 13×20mm, 17×25mm, 20×30mm, 24×35mm & 27×40mm.
Curved Drop: 11×15mm, 14×20mm, 18×25mm, 21×30mm, 25×35mm & 28×40mm.
Diamond Drop: 10×15mm, 13×20mm, 16×25mm, 19×30mm, 22×35mm & 25×40mm.
Flair Drop: 15×15mm, 20×20mm, 25×25mm, 30×30mm, 35×35mm & 40×40mm.
Heart: 18×15mm, 23×20mm, 29×25mm, 35×30mm, 41×35mm & 46×40mm.
Inverted Square: 15×15mm, 20×20mm, 25×25mm, 30×30mm, 35×35mm & 40×40mm.
Moroccan Drop: 13×15mm, 17×20mm, 21×25mm, 25×30mm, 29×35mm & 33×40mm.
Moroccan Square: 15×15mm, 20×20mm, 25×25mm, 30×30mm, 35×35mm & 40×40mm.
Narrow Diamond: 7×15mm, 9×20mm, 11×25mm, 13×30mm, 15×35mm & 17×40mm.
Pointed Arch: 8×15mm, 11×20mm, 13×25mm, 16×30mm, 19×35mm & 21×40mm.
Rain Drop/ Tear Drop: 10×15mm, 14×20mm, 17×25mm, 20×30mm, 24×35mm & 27×40mm.
Rounded Square Drop: 11×15mm, 15×20mm, 18×25mm, 22×30mm, 25×35mm & 29×40mm.
Sweep Drop: 7×15mm, 9×20mm, 11×25mm, 13×30mm, 15×35mm & 18×40mm.
Sweep Drop - Mirrored: Same as sweep drop.
Uneven Hexagon: 10×15mm, 13×20mm, 16×25mm, 19×30mm, 22×35mm & 25×40mm.

Note: smaller sizes of cutters maybe be a choking hazard and should be kept away from small children.

Colour:
The colour of cutters will vary depending on availability.


Care:
The cutters can be washed in warm but not hot (below 40°C) soapy water. Store the cutters below 50°C and out of direct sunlight to ensure the plastic doesn't deform or degrade. A soft brush may help when cleaning intricate parts. Avoid lateral force to the cutter as this may damage it.


Usage:
Press cutter into clay surface wiggle ever so slightly sideways and remove. The smaller sizes (15mm & 20mm) can be trickier to use depending on the clay and work surface, ensuring your clay is adhered to the work surface can help.

Depending on the polymer clay and work surface, a release agent such as cornflower may be required to stop the clay sticking to the cutter refer to the manufacturer of your polymer clay for recommended release agents.