NEW GENUINE BOSCH 8.3L CUMMINS 12-VALVE PERFORMANCE INJECTOR SET FOR CASE IH TRACTORS EQUIPPED WITH MECHANICAL FUEL INJECTION PUMP

This is a new set of (6) genuine Bosch performance injectors for the 8.3L Cummins 12-valve engine installed in the Case IH tractors equipped with a Bosch or Nippondenso mechanical fuel injection pump.  This is a custom built injector set, using all genuine Bosch parts (no knock-off Chinese parts).  Depending on the stock HP rating of your engine, this set of injectors will add between 60-80 HP/200-250 FT-LBS of torque to the 8.3L Cummins engine, without producing black exhaust smoke, and without creating excessive exhaust temperature issues.  These performance injectors will allow your tractor to maintain full load RPM much better and pull through the field in a higher gear.  These injectors include the injector installation kit (copper combustion sealing washers, copper horseshoe fuel return washers, and dust seal sleeves).  These injectors come with a one year warranty, and are sold outright with no core charge.  We can be contacted at Red Oak Diesel Clinic, Inc. (7126232221) Monday-Friday 8-5 Central time.

NOTE:  When ordering these performance injectors, we will need the 8 digit engine serial number from the engine identification tag, located on the side of the front engine gear case, in front of the fuel injection pump.  Also, we will need to know what size of wrench it takes to loosen the fuel injection line nuts at the injectors (17mm or 19mm), which will determine which inlet thread size that your injectors require (12mm thread or 14mm thread).  And finally, the 10-digit part number off of the Bosch or Nippondenso fuel injection pump tag is also helpful to match the correct performance injector set for your engine.  This is due to multiple injection system component combinations used on these engines.