This cable offers Plug&Play connection of rear view cameras in Ford cars with OEM Ford Sync 1 (FORD NAV MFD LOW) monitor.
Image from the rear view camera is displayed automatically when reversing. When camera is connected all OEM functions remain.
Note! Rear view camera functionality should be activated prior to the connection, either by the dealer or by a service center that has diagnostic equipment for Ford cars.
Note! Connected rear view camera should be constantly powered up from the ACC line (second turn of the key). Otherwise, the rear view camera input will not be active. Depending on the type of the camera, namely on the voltage required for the camera, you can use input voltage +6 V, produced by the monitor. In case the camera requires more than +6 V, connect the camera power to the ACC line.
Model | Model years | Additional compatibility conditions | |
---|---|---|---|
From | To | ||
B-MAX | 2013 | – | 5" monitor FORD NAV MFD LOW |
C-MAX | |||
Ecosport | |||
Escape | |||
Fiesta | 2012 | ||
Fiesta ST | 2014 | ||
Focus 3 | 2013 | ||
Kuga | |||
Tourneo Connect | 2014 |
Note! Only cameras of NTSC format are supported.
If you have any questions, please don't hesitate to contact us!