Our Skinning Carbon fibre kits contains everything needed to wrap over an original existing part
in genuine carbon fibre. The kit contains you choice of 200g twill carbon fibre cloth or our plain
weave pattern, basecoat and clear epoxy topcoat, Also included are our abrasive papers,
polishing compound and the ancillaries you will need to finish the job.
Carbon Fibre Skinning explained
Carbon fibre skinning is the process of overlaying existing components with a single layer of real
carbon fibre in order to give them a genuine carbon fibre look. When done correctly apart from
the weight it should be impossible to tell the difference with one made from 100% carbon fibre .
The process can be used on mostly any components and materials you wish to use it on ie car
trim consoles, binnacles, dash parts, exterior parts wing mirrors, skirts, diffusers, bonnets/hoods
you can also use it on furniture, architectural features, household objects and exhibition displays
Skinning is mostly done for cosmetic purposes, However carbon fibre skin will also add a tough,
durable finish to the original component. It will also increase the strength and stiffness of the
original part.
Please Note: Some plastics (including polypropylene, polyethylene, HDPE and others) can be
very difficult to bond to. Parts made using these or similar plastics are unsuitable for skinning
unless prepared with a suitable plastic primer
Kit Contents
Our Carbon Fibre Skinning Kits are available in three sizes. Standard, Medium, Large
Standard Carbon Fibre Skinning Kit
1000mm x 300mm 200g Twill or Plain weave 3k Carbon Fibre Cloth
150g BBS Black base coat and BBS basecoat Hardener
400g CRL Clear Epoxy Coating Resin and CRL Epoxy Hardener
50ml P200 Cutting Polishing Compound
3 Pairs latex gloves,
3 Mixing Cups
3 Mixing Sticks
3 x 1 inch Laminating Brushes
120, 240, 400, 800 & 1200 Grit Wet and Dry Abrasive Paper
Medium Carbon Fibre Skinning Kit
1000mm x 1000mm 200g Twill or Plain weave 3k Carbon Fibre Cloth
250g BBS Black base coat and BBS basecoat Hardener
1kg CRL Clear Epoxy Resin AND CRL Epoxy Hardener
80ml P200 Fast-Cut Polishing Compound
4 Pairs latex gloves,
4 Mixing Cups
4 Mixing Sticks
4 x 1 inch Laminating Brushes
120, 240, 400, 800 & 1200 Grit Wet and Dry Abrasive Paper
Large Carbon Fibre Skinning Kit
1000mm x 1500mm 200g Twill or Plain weave 3k Carbon Fibre Cloth
500g BBS Black base coat and BBS basecoat Hardener
1.5kg CRL Clear Epoxy Resin AND CRL Epoxy Hardener
100ml P200 Fast-Cut Polishing Compound
4 Pairs latex gloves,
4 Mixing Cups
4 Mixing Sticks
4 x 2 inch Laminating Brushes
120, 240, 400, 800 & 1200 Grit Wet and Dry Abrasive Paper