Product Description

【Important! Read carefully】 ONLY DESINGED FOR METAL & STAINLESS STELL TUBS!!! This W10518394 heating element Includes heater element, 2 heater fasteners, perfectly works well on Whirlpool manufactured brands (ken-more, May-tag, Estate etc) dishwashers with metal & Stainless Steel Tubs.

【Compatibility】W10518394 heating element dishwasher part numbers: W10518394, W10134009, W10441445, 8563007, 8194250, 8572861, AP5690151, EAP8260087, 2977737, PS8260087, W10518394VP, ERW10134009, ERW10518394. Compatible with WDF520PADM7, WDT710PAYM3, WDT720PADM2, MDBH949PAM4, WDF520PADM5, WDF510PAYS6, WDF520PADM3, WDF320PADW1, WDF310PAAS3, WDF520PADM0, WDT720PADM1, WDF510PAYB6. If you are not sure if it is the right dryer for you, please feel free to contact us and we will help you to confirm.

【Fixes Symptoms】If the dishes in your dishwasher are not drying or the water in the dishwasher is not getting hot, you can consider replacing the W10518394 heating element. [Installation]: Disconnect power before installing the Heating Element Kit. The installation requires the use of adjustable wrenches, screwdrivers, and needle-nose pliers. You can find the repair video on YouTube and install it according to it.

【APPLIANCEMATES - QUALITY】 The replacement Whirlpool Dishwasher Heating Element W10518394 made of quality material and well-tested by the manufacturer. Our offers a durable and reliable whirlpool dishwasher replacement parts designed to improve, enhance, and maintain your dishwasher, non-original aftermarket parts .

【AFTER-SALES SERVICE】 100 satisfaction guarantee. Any questions, you can contact us, we will try out best to give you a satisfactory solution. Note: This dishwasher heating element is not sourced by or sponsored by whirlpool. The manufacturer's name has been used for reference purposes only.

Q1: What is the normal use temperature?

A1: The operating temperature should be controlled at about 60 degrees. Excessive temperatures can damage the dishwasher.

Q2: Why does everyone say that this heating element will cause the dishwasher to melt?

A2: Dishwasher melting may have the following reasons:

1: The temperature of the dishwasher is too high, and it is better to control it normally at 60 degrees;

2: The heating element is not properly shaped, and some parts are too close to the dishwasher, resulting in a high degree of long-term melting of the dishwasher.

To fix this, you need to reshape the heating element and readjust the metal clips that support the element so that each part of the heating element is greater than 1Inch from the bottom of the dishwasher.

3: You can buy tin foil and put it on the bottom of the heating element to prevent melting.

Q3: What if the filter element may not be heated enough or not heated at all?

A3: This is because the dishwasher's computer balances with the old filter element or detects a malfunction and cannot be used.

To fix this, you need to run a test/reset of the dishwasher system so the computer can test the new element coil resistance and enable it again for use. To do this on many machines, you need to turn it off (no plate or soup on it) and press 3 consecutive buttons in sequence (anyone but cancel) in less than 30 seconds (123, 123, 123) 3 times. In my case you can see in the picture:

"Choose Cycle" and "Choose Options"

This will light up all the lights, indicating that testing and calibration is in progress, and run the wash cycle when it's done ready to use (no dishes or soup on it). Sometimes it may take 2 runs to work.

On Jan 3, 2024 at 22:27:16 PST, seller added the following information: