Driver Specification
|
Input voltage |
180-250VAC |
Name |
3ph Hybrid servo driver |
|
Output Current |
4.0A |
Model |
3HSS2208H-110 |
|
Logic input current |
7-20mA（10mA Typical） |
Communication rate |
57.6kbps |
|
200K |
|||
|
Protect
|
1. The peak overcurrent protection is 12A ±10% 2. The overvoltage action value is 400VDC 3. The error alarm threshold can be adjusted through the front panel of the driver |
||
|
Size |
140x70x56mm |
||
|
Weight |
1.5kg |
||
|
Work environment |
1. Avoid dust, oil, and corrosive gases 2. The maximum operating temperature is 70° C 3. Storage temperature -20 ° C to +65 ° C 4. Cooling method - Natural cooling |
||
Note：Installation mode: Install the heat sink on the vertical side so that there is strong air convection on the surface of the heat sink. If necessary, install a fan near the driver for forced heat dissipation.
Driver Wiring Diagram
NEMA 44 Motor Specification
Model:110HB350-B16N
Flange:110mm
Holding Torque:16N·m(2266oz-in)
Rotate speed:0-1000rpm
Motor length:190mm
Shaft diameter:19mm(keyway=6mm)
Shaft length:38mm
Shaft type:single
Phases:3PH
Step angle:1.2°
Rated Current:5A
wiring method:three phase three wire system
Model:110HB350-B20N
Flange:110mm Holding Torque:20N·m(2832oz-in) Rotate speed:0-1000rpm Motor length:190mm Shaft diameter:19mm(keyway=6mm) Shaft length:38mm Shaft type:single Phases:3PH Step angle:1.2° Rated Current:6.8A wiring method:three phase three wire system
