NEW ICOM RS-BA1 Ver.2 FCC/CE/UKCA IP Remote Control Software in ICOM flash driver with USB cable and preparations in ICOM original box
The dualwatch operation and dual spectrum scopes with the waterfall functions* can be used on your remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 at the same time. Of course, the RS-BA1 can be used with Icom single receiver transceivers.
* The dualwatch and dual spectrum scope functions are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are usable with the IC-7300, IC-9700 and IC-705.
Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2.
The RS-BA1 offers real-time operation with low latency, high quality audio. You can use the transceiver installed in another room using your home network, or even from a remote location over the Internet*.
* A static public IP address or Dynamic DNS is required for the base station (Server) PC, when you configure the remote control system through the Internet.
IC-7851 IC-7850 |
IC-7800 IC-7700 |
IC-7610 | IC-7600 | IC-7410 IC-9100 |
IC-7300 | IC-7200 | IC-7100 | IC-9700 | IC-705 | |
---|---|---|---|---|---|---|---|---|---|---|
Dualwatch Function |
✓ |
- |
✓ |
- |
- |
- |
- |
- |
- |
- |
Server Function |
✓ |
✓ |
✓ |
- |
- |
- |
- |
- |
✓ |
✓ |
Remote Power ON/OFF |
✓ |
✓ |
✓ |
✓ |
- |
✓ |
- |
✓ |
✓ |
✓ |
Spectrum Waterfall Scope |
✓ |
- |
✓ |
- |
- |
✓ |
- |
- |
✓ |
✓ |
Scroll Mode |
- |
- |
- |
- |
- |
✓ |
- |
- |
✓ |
✓ |
APF AF Level Adjustment |
✓ |
✓ |
✓ |
✓ |
- |
- |
- |
- |
- |
- |
CW Keyer |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
- |
✓ |
✓ |
✓ |
Voice Recording/Playback |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
USB Dial with Optional RC-28 |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ : Function available. - : Function Not available.
*Depending on your transceiver, some functions or modes cannot be used, or you need to update
the transceiver’s firmware.
Please use the latest firmware version of the transceiver.
PC (Base station or Remote station)
* When only one transceiver and one PC are connected to the Server PC.
Operating System |
Windows 11 (64 bit), |
|
---|---|---|
CPU |
1.8 GHz Processor or better |
|
Memory |
Windows 11 (64 bit): 4 GB or more |
|
Hard disk space |
150 MB or more of available disk space |
|
Network data speed (When the default audio quality is used) |
To use the Dualwatch function (IC-7851/7850/7610) |
For the Base station: |
Other models (Other than the IC-7851/7850/7610) |
For the Base station: |
|
Display Resolution |
1024 × 768 pixels (enlargeable) |
|
Other |
Speaker and microphone or headset (purchase separately) |
This is the minimum system requirement to use the RS-BA1 Version 2.
Because the system requirements may differ, depending on your PC environment (permanently running software such as antivirus software, peripheral devices, network condition, settings of OS and other software), the operation is not guaranteed.
All stated specifications are subject to change without notice or obligation.
Note for original version RS-BA1 users: Free upgrade service from RS-BA1 to RS-BA1 Version 2 is not available. To obtain the new features in the RS-BA1 Version 2, the purchase of a new software package is required.
International buyers paying and shipping information:
All items could ship worldwide.
1.Paying methods:
A. We prefer Paypal.
B. Other paying method please ask before you bid.
2. Shipping Fee & Methods:
The standard shipping rate is for Registered Post Office Airmail small packet. After receiving payment, we will send what you win on auction between 2days . The shipping time is 2 weeks to buyer’s location if not any delay. We can not offer airmail parcel to Italy, only EMS or FedEx to Italy.
We can send items via EMS or Fedex but the shipping fee would be different.