MOTUL C1 CHAIN ​​CLEAN KIT MOTORCYCLE CHAIN ​​SPRAY CLEANER WITHOUT CHLORINE + 


C4 CHAIN ​​LUBE GREASE SPRAY LUBRICANT + 


MOTORCYCLE AND CYCLES CHAIN ​​CLEANING BRUSH


OFF-ROAD - ROAD - CROSS



MOTUL C1

USE
Chain Clean cleans all types of road and off-road motorcycle chains and those of other vehicles:
bicycles, mopeds, mopeds, go karts, quads …).

PERFORMANCE
Chain Clean cleans all types of road and off-road motorcycle chains and those of other vehicles.
Removes all encrusted deposits: dust, sand, earth, oil. Its chlorine-free formulation for extreme degreasing is perfectly suited to chains with O-ring, Xring, Z-ring seals.
It evaporates very quickly.

RECOMMENDATIONS
Shake before using.
1- Spray on the chain and let it dry for 5 minutes.
2- If the chain is very dirty, clean with a non-abrasive brush and spray again.
3- Lubricate the chain with Chain Lube Road (for street bikes) or Chain Lube Off Road (for off-road bikes) or Chain Lube Factory Line (for racing bikes).
To increase the life of the chain, repeat this operation every 1000 km.

MOTUL C4

White lubricant for motorcycle chains, it guarantees speed and resistance. Formulated with AW / EP solid additives.

USE 
The result of Motul's experience in motorcycle racing, for road use only (adhesive product), MOTUL CHAIN ​​LUBE Factory Line is a lubricant specially developed to lubricate racing motorcycle chains: track and endurance races. Particularly recommended for very fast motorcycles: MOTUL CHAIN ​​LUBE Factory Line adheres to the chain even at high speeds. 

PERFORMANCE 
Developed with a high content of AW/EP (Antiwear - Extreme Pressure) additives, MOTUL CHAIN ​​LUBE Factory Line reduces rolling resistance, increases transmission efficiency and maintains its lubricating properties at high temperatures. Increases chain life. Resistant to water and rust. Protects O-ring, X-ring and Z-ring seals. Contains a solvent to remove old residues and to penetrate connections. White in color for easier application. 

RECOMMENDATIONS 
Clean the chain with MOTUL CHAIN ​​CLEAN. Shake before using. Apply along the entire internal length of the chain: easier application thanks to the white color of the product. MOTUL CHAIN ​​LUBE Factory Line adheres completely after 10 minutes of drying.















The result of Motul's experience in motorcycle racing, for road use only (adhesive product), MOTUL CHAIN ​​LUBE Factory Line is a lubricant specially developed to lubricate racing motorcycle chains: track and endurance races. Particularly recommended for very fast motorcycles: MOTUL CHAIN ​​LUBE Factory Line adheres to the chain even at high speeds.  Developed with a high content of AW/EP (Antiwear - Extreme Pressure) additives, MOTUL CHAIN ​​LUBE Factory Line reduces rolling resistance, increases transmission efficiency and maintains its lubricating properties at high temperatures. Increases chain life. Resistant to water and rust. Protects O-ring, X-ring and Z-ring seals. Contains a solvent to remove old residues and to penetrate connections. White in color for easier application.  Clean