|
DC 12V 24V Digital LED Trigger Countdown Timer Delay Turn Off Time Relay Switch
Description:
100% brand new and hight quality.
Function: After trigger,the delay start action,the relay is connected at oncethe relay close after the time of countdown
1. Trigger: On the KEY teminal as trigger,usually connect with an exteral button,also connect to the voltage signal. The trigger is invalid after the first trigger lt is necessary to wait for the end of the countdown to trigger again.
2. Time adjustment: Press the Up button.it is increase the time.the maximum is 999.Press the Dowm button, it is decrease the minimum is 1. The unit of time is second Be careful not to adjust the time during the countdown.Long press the button to quickly adjust the time.Do not cut off power immediately after time adjustment.
3. Display: When it is not triggered,display the settings time.Display the remaining time after the trigger.
During setup,flashing time is the setting time.
Module parameters:
1.Voltage: DC12V(Range: DC10V-16V) or DC 24V
2.Consumption:0.5W
3.Time Range:1-999 Seconds
4.Display Mode. 3-bit Red Digital Tube
5.Time Adjustment: Button (with blackout memory,the next power supply is automatically transferred to the final settings)
6.Accuracv: 1 Second
7.Error: 2%
8.Trigger Mode: Short Connection For More Than 0.025 Seconds
9.Output Terminal: NO/NC
10.Output Capacity: 10A(Voltage range AC 0-250V or DC 0-30V)
11.Size:90mm*40mm*20mm(L*W*H)
12.Weight: 30g
13.Tips: This module supports functional customization.If vou need other function,please let us kmow.Thank you.
Interface description:
12V+ Power supply positive
12V- Power supply negative
NO Relay NO terminal
COM Relay COM terminal
NC Relav NC terminal
KEY-1 Button terminal, with triangular identifier
KEY-2 Button terminal, interconnect with 12V+
What's in the package:
1 x Module
Warm reminder:
The colors may be a little difference for the different monitor display.
Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
|